Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Hey John Saeli - Case Type 41 magneto question

Welcome Guest, Log in or Register
Author 
Mike Schotte

09-22-2003 15:21:59




Report to Moderator

Hey John,

I know you've said you've got coils for the later type 41 mags- but how do you remove these coils?

I've got a magneto service manual for the 4JMA, but no service info on the type 41.

Do you need any type of puller, or did they solve that particular problem? (I hope those damn things aren't inter-leaved)

I'm currently fighting with a 4JMA that Cy gave me. I've got all the rust disolved, but the corrosion on the non-ferrous metal is still holding all those screws in tight.

I still don't know how somebody managed to get a magneto PACKED full of sand... but they did it!

(And I *love* the fact that you can't get a screwdriver in to loosen the screw holding the rotor on unless you can get the condenser screw out of the way first!)

I noticed that they swapped sides for that particular screw in the type 41, and it was easy as pie for me to remove.

Thanks, -Schotte

[Log in to Reply]   [No Email]
Glen in TX

09-22-2003 23:40:02




Report to Moderator
 Re: Hey John Saeli - Case Type 41 magneto question in reply to Mike Schotte, 09-22-2003 15:21:59  
Hi Mike, It takes a special puller to get the coil out of the 4JMA and a special tool to press back in. You can make the puller. Yes, the laminations are interleaved. Don't know what manual you have but I made some more copies of mine the other day. It is 50 pages so email me if you want a copy. Covers the 4CMA base mt., 4JMA, 41, 4CAMA aircraft, and shows pic of service tools and procedures. The 41 mag has wedges holding the coil in and the service manual show using a 6" or 8" cresent wrench to roll them out. I don't have any of the special Case mag tools either. Just have to make them. I know there are some out there but those stingy guys don't share. You can also substitute other coils in the 4JMA by sawing off the old coil laminations flush and then mount another one with clamps and screws. The trick is to match the coil you use with the right condenser. A fairbanks morse J or X coil can be made to fit and some have even used a briggs & str. coil. A 41 coil or a Slick aircraft coil can be mounted this way too or if yours comes out you can get it rewound or exchange.

[Log in to Reply]  [No Email]
John Saeli

09-22-2003 17:30:27




Report to Moderator
 Re: Hey John Saeli - Case Type 41 magneto question in reply to Mike Schotte, 09-22-2003 15:21:59  
Hey Mike: I can't help you on coil removal. I've never done it. I hollered for you last week on the bashing board, don't you go over there any more? CASEPOWER is still running from the UPS cops in the suits & dark glasses, but he shows up once in a while then has to run again. BTW, Ol'e buddy, Pal, Good friend, we might even be 4th cousins 6 times removed, but you do have the vault combination for that bank you're building, right??

[Log in to Reply]  [No Email]
Mike Schotte

09-22-2003 17:40:01




Report to Moderator
 Re: Re: Hey John Saeli - Case Type 41 magneto ques in reply to John Saeli, 09-22-2003 17:30:27  
Hi John,

Thanks anyway. Looks like the type 41 is much easier to get into... I'll just have to figure it out.

Nope, I don't visit the Bashing Board very much anymore. Between the posts from Steven H and JD4020Gas... it was enough to make me want to shoot myself. (grin)

I checked out that new T r a c t o rforum.com website that was posted here a few days ago- but it's completely empty over on their CASE board. As they say in those cop shows: "nothin' to see here, move along..."

To answer your question- nope, I don't have the combination for the vault. Heck, they haven't even BUILT the vault yet. We're just trying to get the thing out of the ground right now.

Just out of curiousity... what's the cousin 4th removed discount on one of them coils? (grin) Don't think I need one, but it might be nice to have a spare.

-Schotte

[Log in to Reply]  [No Email]
John Saeli

09-22-2003 17:44:59




Report to Moderator
 Re: Re: Re: Hey John Saeli - Case Type 41 magneto in reply to Mike Schotte, 09-22-2003 17:40:01  
Hey Mike! Never heard of that new site. I think I said we "might" be cousins but that possibility fades with the combination. Price on a coil is $60.00. I'll pay the postage.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy