Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Midmount Sickle Mower for 210B

Welcome Guest, Log in or Register
Author 
Bruce Nelson

09-18-2003 05:39:50




Report to Moderator

I have a midmount sickle mower for a Case 210B. It is hydraulically driven and is complete with a pump and tank that connects to the front of the crankshaft and bolts to the front of the tractor. The drive motor flange is cracked where it attaches to the frame, but could be repaired easily. This comes with hydraulic valves to raise and lower the sickle bar. Otherwise it would make a great auxiliary hydraulic unit for some other attachment. What's it worth? Anybody interested in something like this? It's 50 miles NE of St. Paul, MN. I would be glad to trade it and some cash for a 660 201 inch combine engine. Thanks, Bruce

[Log in to Reply]   [No Email]
dctom

09-18-2003 09:21:20




Report to Moderator
 Re: Midmount Sickle Mower for 210B in reply to Bruce Nelson, 09-18-2003 05:39:50  
OH MY BRUCE WHAT U UP TO NOW lol DCTOM



[Log in to Reply]  [No Email]
JohnM

09-18-2003 08:34:31




Report to Moderator
 Re: Midmount Sickle Mower for 210B in reply to Bruce Nelson, 09-18-2003 05:39:50  
Is it a triumph Hydro Clipper by any chance? I have 1 on my 411B. Is it a six or seven foot bar?



[Log in to Reply]  [No Email]
george md

09-18-2003 16:50:08




Report to Moderator
 Re: Re: Midmount Sickle Mower for 210B in reply to JohnM, 09-18-2003 08:34:31  
John, If it's a case mower , there is a good chance that it is a model 30 or 31 , most likely a 31 , as 30's were used on the 300 round nose.

george



[Log in to Reply]  [No Email]
Bruce Nelson

09-18-2003 16:07:37




Report to Moderator
 Re: Re: Midmount Sickle Mower for 210B in reply to JohnM, 09-18-2003 08:34:31  
John, I do not know what brand it is. It's been repainted and is yellow now. The whole tractor was yellow, steering wheel, gauges and all. It has a five foot bar on it and the sickle sections say CASE/IH on them. Bruce



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy