Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

What To Paint

Welcome Guest, Log in or Register
Author 
John from ILL

09-14-2003 05:46:13




Report to Moderator

I Have my S C Case ready to paint. I have the right paint but do not know what parts should be Black. Every one I look at is not the same. I know the Starter,Gen,head lights and the mag should be I think. What about the air breather? What about the water cap and gas? Any help help would be nice. Thanks John.




[Log in to Reply]   [No Email]
Mike Schotte

09-14-2003 06:04:50




Report to Moderator
 Re: What To Paint in reply to John from ILL, 09-14-2003 05:46:13  
Hi John,

I've been pondering this same question myself.

The radiator cap and gas cap should be Flambeau Red.

If you have a 3-spoke steering wheel, the spokes should be black. If it's the earlier 6-spoke type, then it's Flambeau.

The carburetor should be black.

Like you- I've seen the air cleaner painted either color. Not sure if the early ones were black or not.

Every air cleaner that I've ever gotten from a junk tractor has been painted flambeau.

Some people paint the air intake cap black, and I think I've seen it this way in early photos, too.

I think it looks good- but can't tell you for which years that would be correct.

Good luck, -Schotte

[Log in to Reply]  [No Email]
Scott KY

09-14-2003 16:56:07




Report to Moderator
 Re: Re: What To Paint in reply to Mike Schotte, 09-14-2003 06:04:50  
I have a picture of SC's coming down the assembly line about 1940. It shows the six spoke steering wheel painted black. The picture shows the right side of the tractors so I can't tell about the air cleaner itself but the cap is black.



[Log in to Reply]  [No Email]
RandyD

09-14-2003 11:03:34




Report to Moderator
 Re: Re: What To Paint in reply to Mike Schotte, 09-14-2003 06:04:50  
Mike I have seen no documentation on the carb being anything other than Flambeau red. Do you have pictures?
As far as the air cleaner goes it seems like some were painted black by the vendor then repainted Flambeau red at the Case factory. Mine was that way. I have talked to others with the same paint scheme. But I do have color brochures pictures that show black air cleaners with decal.
I think if you have a Flambeau red air-cleaner then you should have a black air intake cap. If your air cleaner is black then the cap is Flambeau red.
My air-cleaner cap was black with the tube and cleaner Flambeau red.
One of the best ways to determine color is to be very careful removing the old finish and do a little detective work.

Randy

[Log in to Reply]  [No Email]
Mike Schotte

09-14-2003 11:47:35




Report to Moderator
 Re: Re: Re: What To Paint in reply to RandyD, 09-14-2003 11:03:34  
Hi Randy,

I don't have any documentation about the color of the carburetor- I was just going on the bulk of my observations.

Most of the carburetors in the Case tractor books are black... but all of these tractors have been restored.

I just looked for original photos- I've seen an original '41 and a '43 SC with flambeau carburetors and black air cleaners and "Z" tubes with the sticker on the air cleaner body.

You are probably right- but I personally prefer the black carb. Everytime I see one in flambeau... it looks like one of those paint jobs where everything (including the fan belt!) has been painted with a heavy hand.

We can't really go by color brochures and count on them doing the color separations correctly.

As I was looking through the photos- I realized how many tractor views are from the MAGNETO side! Not many looking the other way. (grin)

-Schotte
(p.s. - did you ever get your decals?)

[Log in to Reply]  [No Email]
RandyD

09-14-2003 12:25:17




Report to Moderator
 Re: Re: Re: Re: What To Paint in reply to Mike Schotte, 09-14-2003 11:47:35  
I keep hoping to find an Eagle magazine that has pictures of the painting process. From my observations on the original paint on my SC it looked like the tractor was assembled then painted. All the hoses and wiring were coated and everything on the backside of the instrument panel had been painted. The original mag had no paint treatment.
The picture on the link below shows the original condition of my air cleaner.
I called Mr. Wacher and he said he would put them in the mail to me on Wednesday. He is also putting me a decal for the oil filter. My biggest problem now is trying to figure out a way to get the belt pulley off without warping it.

Randy

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy