Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

CC on the dyno

Welcome Guest, Log in or Register
Author 
Dan in Ore

09-13-2003 21:34:49




Report to Moderator

Dynoed the 1930 CC today. It came out about 33 HP on the PTO. Nebraska tractor test in 1929 was 28.97 on the belt.

Gonna try discing with it tomorrow.

Dan




[Log in to Reply]   [No Email]
Okla/kans Bill

09-14-2003 13:29:35




Report to Moderator
 Re: CC on the dyno in reply to Dan in Ore, 09-13-2003 21:34:49  

my advice is, let the drawbar swing free. Helps on the corners. I pull an 16ft IHC disc without the wings. I pulled it for many years with the CC, but got an F-30 and now do all the heavy work with it, plowing and discing, as the CC has narrow tires, and not as big dia either so the 30 has more traction down here in Okieland sand than up in NE Kansas where it pulled 3 14s in hills



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy