Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Correct Color for Case Drill

Welcome Guest, Log in or Register
Author 
Jim

09-04-2003 20:59:32




Report to Moderator

I have an old iron wheeled Case Seedmeter drill.
I plan on repainting it this spring, what is the correct color?

There seems to be one or two microscopic pieces of green paint on the frame, the boxes are galvanized metal.

Thanks for your help!




[Log in to Reply]   [No Email]
Don H

09-08-2003 14:01:42




Report to Moderator
 Re: Correct Color for Case Drill in reply to Jim, 09-04-2003 20:59:32  
Jim, I refurbished a model "L" drill two years ago. The frame was CASE gloss red. Openers, axles and associated parts CASE implement green and the wheels are CASE wheel green. I'm sure that your steel wheeled drill would be the same. Take tour time, repainting an implement is as much or more time consuming than a tractor.



[Log in to Reply]  [No Email]
george md

09-07-2003 19:28:36




Report to Moderator
 Re: Correct Color for Case Drill in reply to Jim, 09-04-2003 20:59:32  
Jim,
Did you get a seed chart for the drill yet ? I
have them for seed , grass seed and fert.

george



[Log in to Reply]  [No Email]
Jim C.

09-07-2003 20:51:22




Report to Moderator
 Re: Re: Correct Color for Case Drill in reply to george md, 09-07-2003 19:28:36  
No, I haven't found a seed chart yet! Please email me at [email protected] to make a deal on a copy of your seed chart!

Thanks!

Jim



[Log in to Reply]  [No Email]
george md

09-05-2003 19:57:42




Report to Moderator
 Re: Correct Color for Case Drill in reply to Jim, 09-04-2003 20:59:32  
Jim,

I have an L low wheel grain drill 16 disc that

is nearly as old as the steel wheeled ones . boxes

are red on mine , but the manual that came with

the drill shows some boxes unpainted (galvanized).

Most of the hitch and frame is red with green

wheels and hubs . the seedmeter adjustments are

green, boots and seed tubes green,shoes and swing

arms green. It has two ground drive lifts and they

are green .

I think it was built in 1950 .

george

[Log in to Reply]  [No Email]
Glen

09-05-2003 07:20:54




Report to Moderator
 Re: Correct Color for Case Drill in reply to Jim, 09-04-2003 20:59:32  
The later rubber tired Case grain drills. The galv.wasn't painted the rest of the drill was painted a dark green including the wheels



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy