Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

LOOKING FOR 1/2 SCALE ENGINE OF CASE LA

Welcome Guest, Log in or Register
Author 
JEFF

01-12-2003 19:03:00




Report to Moderator

I RESTORED A CASE 1944 LA AND I WOULD LIKE TO MAKE A MINITURE TRACTOR OR 1/2 SCALE OF IT BUT I CAN'T FIND ENGINE THAT IS CLOSE TO HAVING SAME SPECS. 4 CYLINDER,GAS,OVERHEAD VALVE,MAGNETO ON RIGHT SIDE,ELECTRIC START, VALVE COVER SHOULD BE IN LENGTH AROUND 14" - 20", IF I COULD FIND SOMETHING CLOSE, I LOOKED AT IH C ,STARTER BACKWARDS, LOOKED AT ONE KIND OF WISCONSIN BUT MAGNETO ON WRONG SIDE. OPEN FOR SUGGESTIONS,I HAVE FOUND ALL OTHER PARTS,TRANSMISSION,TIRES,SHEETMETAL I WILL MAKE.

[Log in to Reply]   [No Email]
jeff

01-18-2003 20:00:44




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
alot of good idea's guys,the vac engine i looked at but is a little to big,but i might have to use one, i haven't seen a wauseka engine but i will investigate more on that. i ask the same dump question,why is a 3/8 scale so much small then 1/2 scale,the 3/8 scale i seen of the case l was real small. more idea's guys keep it coming jeff also i've been looking into buying a case crossmotor good idea or bad idea

[Log in to Reply]  [No Email]
wheat straw

01-15-2003 21:08:07




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
Jeff,

What's the possability of the little VAC engine as a small LA. Exhaust is on the left side. Can have a mag. Has overhead valves. Just a thought. Any idea?

Wheat Straw



[Log in to Reply]  [No Email]
john

01-15-2003 15:49:42




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
At a show in Sardis, MS a few years ago, a man had a 1/2 scale L. He had used a forklift engine and transaxle. the intake and stuff was on wrong side but everything else was there just right. Even had gear wine like a real case. I don't know his name though.



[Log in to Reply]  [No Email]
John Ne.

01-14-2003 18:20:07




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
Awhile back at a threshing show, fella had a half scale McCormick Deering 15-30 driving a belt to a half scale thresher, The tractor looked great, when they shut her down I asked about the details, believe they used an old Waukesha engine, something they had found on a combine or power unit. Didn't look as perfect as that Case but sure impressed me. John in Ne.



[Log in to Reply]  [No Email]
JEFF

01-13-2003 19:34:34




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
THE 3/8 SCALE TRACTOR DID SALE FOR 13000.00 BUT THE OWNER HAD SOMEBODY AT THE SALE FOR HIM AND BOUGHT IT BACK OVER THE CELL PHONE. GUYS WHEN I SAY 1/2 SCALE I MEAN CUT EVERYTHING DOWN BY 1/2,I DON'T WANT TO GO,THAT SMALL,I SEEN THAT 3/8 CASE L AND I DON'T HAVE NEAR THE EQUIPMENT TO DO THAT KIND OF WORK. IF YOU GUYS KNOW OF ANY ENGINES LET ME KNOW.



[Log in to Reply]  [No Email]
Dennis/Ohio

01-16-2003 02:59:37




Report to Moderator
 Re: Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-13-2003 19:34:34  
I have a dumb question: Why does the 3/8 scale seem so small compared to a half scale? Thanks, Dennis.....



[Log in to Reply]  [No Email]
CASEPOWER

01-12-2003 20:33:27




Report to Moderator
 Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to JEFF, 01-12-2003 19:03:00  
Look at this 3/8 scale..



[Log in to Reply]  [No Email]
Allan C

01-15-2003 20:54:24




Report to Moderator
 Re: Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to CASEPOWER, 01-12-2003 20:33:27  
Amazing! I've seen miniatue steamers but that's a first.



[Log in to Reply]  [No Email]
Mike Schotte

01-13-2003 06:00:39




Report to Moderator
 Re: Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to CASEPOWER, 01-12-2003 20:33:27  
CASEPOWER-

That's one of the most incredible things I've ever seen. Too bad that website is such a dog to load...

If it were mine, I sure wouldn't auction it off. Heck, all you need is a mini-brush hog attachment and you could mow your front yard with it. (grin)

-Schotte



[Log in to Reply]  [No Email]
George G

01-13-2003 14:38:49




Report to Moderator
 Re: Re: Re: LOOKING FOR 1/2 SCALE ENGINE OF CASE LA in reply to Mike Schotte, 01-13-2003 06:00:39  
If I remember right. It sold for $13000



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy