Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

For the case experts

Welcome Guest, Log in or Register
Author 
Green Envy

12-16-2002 14:45:24




Report to Moderator

What is the idea behind the side steering on the early Case rowcrop tractors. I see that introduced the RC with overhead steering but then went to the side steer. Was there an advantage to the side steer? The style of the DC looks pretty stylish to me except for the steering rod going along side the tractor. Not trying to start a color war because we own an L and I like all tractors. I'm just curious.

[Log in to Reply]   [No Email]
Jeb Mccranie

12-17-2002 14:57:11




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
I think there might be two reasons.

1. offset steering allows the operator a better view of the ground below him.
2. easier to mount & grease.



[Log in to Reply]  [No Email]
Richard

12-17-2002 14:10:00




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
one thing that I've always liked about case is they steer very EZ and the steering wheel seats at a good angle when you drive (not up and down) dont think the DC would look too styllesh with steering over the top of the hood.



[Log in to Reply]  [No Email]
c\ase poor in pa

12-16-2002 18:28:52




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
mike has gotten the closest answer .they put it there so the chickens could keep their hineys warm in the winter. and wouldnt poop on the hood dont ya know



[Log in to Reply]  [No Email]
Pat T

12-17-2002 03:17:46




Report to Moderator
 Re: Re: For the case experts in reply to c\ase poor in pa, 12-16-2002 18:28:52  
Wish those chickens would tell the barn swallows about the "roost", they sure keep decorating my Allis CA in the spring!!

Pat



[Log in to Reply]  [No Email]
c\ase poor in pa

12-16-2002 18:28:38




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
mike has gotten the closest answer .they put it there so the chickens could keep their hineys warm in the winter. and wouldnt poop on the hood dont ya know



[Log in to Reply]  [No Email]
Clint

12-16-2002 18:11:02




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
If my memory serves me right it is a leverage thing. In the first 25% of travel of the wheels to the right and the left a total of 50% of the travel It takes only 1\2 a turn of the steering wheel. So comes the name "Quick Dodge" steering. For the rest of the wheel travel the operator has much leverage to keep the steering wheel from being pulled from his hands or whipped around and breaking a finger. The side mount is the only way they could find to get such huge amount of leverage with minimal steeringwheel turns. If you add both lengths of the turing rods to gether you have a leverage rod of over 2 feet. So to get that it had to stand out from the tractor. Other tractors give you easy turning but it takes several turns to get anywhere. AS my memory serves me...

[Log in to Reply]  [No Email]
Clint

12-16-2002 18:10:22




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
If my memory serves me right it is a leverage thing. In the first 25% of travel of the wheels to the right and the left a total of 50% of the travel It takes only 1\2 a turn of the steering wheel. So comes the name "Quick Dodge" steering. For the rest of the wheel travel the operator has much leverage to keep the steering wheel from being pulled from his hands or whipped around and breaking a finger. The side mount is the only way they could find to get such huge amount of leverage with minimal steeringwheel turns. If you add both lengths of the turing rods to gether you have a leverage rod of over 2 feet. So to get that it had to stand out from the tractor. Other tractors give you easy turning but it takes several turns to get anywhere. AS my memory serves me...

[Log in to Reply]  [No Email]
mj

12-16-2002 18:09:34




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
One thing about the side steering: Any front wheel/axle combination can be fitted to the tractor whithout changing the steering box or its' location. The same setup, with various lengths of draglinks, is used for the VAC, O, I and H. You can have a wide-front, narrow front or a trike, all with the same setup.



[Log in to Reply]  [No Email]
Larry

12-16-2002 17:42:59




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  

If I remember right the steering on the RC had to be changed because of patend infringement. I think this was brought on by IH because of the design of the steering on their Farmall tractor. As far as the chicken roost steering goes. Case felt that that type of steering was easier on the opperator. Have ou ever had the steering wheel jerked out of yor hand while going over rough ground? You'll never have that happen with a DC or SC and some of the early V series tractors.

[Log in to Reply]  [No Email]
CASEPOWER

12-17-2002 08:26:53




Report to Moderator
 Re: Re: For the case experts in reply to Larry, 12-16-2002 17:42:59  
I have done a lot of research on Case tractors. I own a RC overhead. I do know the reason that they changed and have read notes from The case pres. to his engineers. I would love to know for my own knowledge about "If I remember right the steering on the RC had to be changed because of patend infringement. I think this was brought on by IH because of the design of the steering"



[Log in to Reply]  [No Email]
Larry

12-17-2002 08:38:45




Report to Moderator
 Re: Re: Re: For the case experts in reply to CASEPOWER, 12-17-2002 08:26:53  

Darn,now I'm going to have to pick my brain apart trying to remember where I either read,or heard that. What does your sources say on the subject?



[Log in to Reply]  [No Email]
Mike Schotte

12-16-2002 15:12:33




Report to Moderator
 Re: For the case experts in reply to Green Envy, 12-16-2002 14:45:24  
Hi Green Envy,

I thought for sure that I once read that the components for the overhead steering on the RC were supplied by an outside vendor, and that this configuration was dropped to save money on the unit which was not a very successful part of the Case line... However, I cannot find info to back that statement up in any of the books I have.

However, page 54 of "Case GP Tractors" by Pripps & Moorland states:

"Overhead steering was initially furnished, but the steering ratio proved to be too high for the usual Case feel that came with the 'chicken roost' side arm steering. By 1937, the chicken roost had been adapted."

Maybe someone else can speak to why this design was originally developed.

Just remember the difference between and SC and a DC: The SC can hold 12 chickens- while a DC can hold 13! (grin)

-Schotte

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy