Hi All,Just got home from transporting the '49 SC and the '45 SC home from the auction. One long day to end two weeks of getting these ready for transport. Now they are finally safe from the torch. I spent yesterday mounting my spare rear tires (one on each tractor) so they would roll up easily onto the rollback wrecker that I hired to move these old girls. The '45 rolled just fine, but the '49 wouldn't roll at all. Just drug the tires all the way to the wrecker. (and yes, it was in neutral) We had to oil the deck of the rollback to get her to slide off... when he loosened the winch cable- the tractor just STAYED there (perched at quite an angle, too!) When I try to rock the rear tires back and forth by hand, I get a little movement out of the right rear tire, but none out of the left rear tire. Is it possible for the brakes to be rusted and stick this hard? No telling how long these two have been sitting under the oaks. (The brake pedals are frozen.) My only other thought is that it could be something ugly like a drive chain. I didn't know this baby wouldn't move until after I finished mounting the tires. Any and all advice is appreciated. -Schotte (wondering if he found the reason this one was parked...) (p.s. - took the head off the '45 today to soak the cylinders. Do all SCs have these "button top" pistons?)
|