Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Where were the A series CASE plows built?

Welcome Guest, Log in or Register
Author 
R Wyler

10-18-2002 14:45:56




Report to Moderator

I am curious about what CASE factory the fine A series plows were built was it Racine or some other plant? Also when did they begin making them and when did they quite making them? I know this is not about tractors exactly I just figured this would be a good place to find someone who would know. Thanks. Richard.




[Log in to Reply]   [No Email]
Mike Schotte

10-18-2002 17:21:56




Report to Moderator
 Re: Where were the A series CASE plows built? in reply to R Wyler, 10-18-2002 14:45:56  
Hi,

I just purchased an original Dealer's Service Manual for the Case "B", "BL" and "TOA" Series plows.

The back page of the manual has drawings of the "EIGHT MODERN CASE PLANTS" and describes what was produced by each plant.

According to their listing- plows were made at the Rockford Plant and disc plows were made at the Anniston Plant.

Hope this helps, -Schotte



[Log in to Reply]  [No Email]
Terry Nelson

10-18-2002 22:20:50




Report to Moderator
 Re: Re: Where were the A series CASE plows built? in reply to Mike Schotte, 10-18-2002 17:21:56  
Mike, thanks for the info. Where does one obtain information about the series of plows made by Case, including their chronology, etc? I would like to find what would've been a plow matching my '52 SC (Eagle Hitch) and my '59 511B,also Eagle hitch, but I don't know where to begin.



[Log in to Reply]  [No Email]
R Wyler

10-18-2002 17:46:12




Report to Moderator
 Re: Re: Where were the A series CASE plows built? in reply to Mike Schotte, 10-18-2002 17:21:56  
Thank you for the information I imagine that they must have been built at Rockford I supposse the Racine plants were for tractors and tractor components. I have two A series plows. I also have an older one a 2 bottom 16 inch red beam "centinial" trip plow how do I determine the model of it? Thanks again Richard



[Log in to Reply]  [No Email]
Mike Schotte

10-18-2002 18:00:18




Report to Moderator
 Re: Re: Re: Where were the A series CASE plows built? in reply to R Wyler, 10-18-2002 17:46:12  
Hello again Richard,

Sorry I can't tell you anything about your model plow- as I'm just learning myself. My '49 DC project tractor came with a "B" series 2-bottom plow. I bought the manual just so I could figure out how it was supposed to work. Always had a tractor- but never farmed with it.

Just in case anyone else is interested in the factory info- I'll post the entire equipment breakdown for the Case plants as it was listed in the back of my plow manual (circa 1952?)

EIGHT MODERN CASE PLANTS:

RACINE - MAIN WORKS
Heavy Duty Balers, Forage Cutters, Windrowers, Hillside Combines, Threshers

RACINE - TRACTOR WORKS
Agricultural Tractors, Industrial Tractors, Engine Units

ROCK ISLAND
Tractors and Mounted Implements, Engine Units, Hammer Mills, Farm Trucks

ROCKFORD
Plows, Tillage Tools, Drills, Planters, Hay Tools, Tractor Mounted Implements

BETTENDORF
Hay Balers, Combines, Corn Pickers, Forage Harvesters and Blowers

ANNISTON
Disk Plows, Disk Harrows

BURLINGTON
"A" and "F2" Combines, Portable Elevators

STOCKTON
Offset Disk Harrows, Heavy Duty Spring Tooth Harrows

Regards, -Schotte

[Log in to Reply]  [No Email]
R Wyler

10-18-2002 18:06:36




Report to Moderator
 Re: Re: Re: Re: Where were the A series CASE plows built? in reply to Mike Schotte, 10-18-2002 18:00:18  
Thanks Mike that is very interesting I would like to find a D or some model of Case from the same era to go with it. Thanks for all of the intresting information. Richard



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy