Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Mounting PTO Covers on SC and 500B (511B)

Welcome Guest, Log in or Register
Author 
Terry Nelson

08-07-2002 19:22:23




Report to Moderator

The pto covers specified for my '52 SC and '59 511B are part number O8303AB translated in modern terms by the Case-IH computer to A27335. I have received two pto covers from Don L @ Rusty Acres and two more directly from Case-IH. None of them permit bolting directly to the housing-holes don't line up! It appears in the parts diagram that there is a mounting plate that fits between the pto cover and the housing. Does anyone know if there really is a mounting plate that I must need for the interface or are the parts numbers not correct? Thanks for your help.

[Log in to Reply]   [No Email]
RobertTX

08-08-2002 06:44:23




Report to Moderator
 Re: Mounting PTO Covers on SC and 500B (511B) in reply to Terry Nelson, 08-07-2002 19:22:23  
The ones I have been using on the LAs do have a plate that mounts to the housing, then the cover bolts to the plate. They are in the Case parts books, but I think they are kind of a "one size fits all" deal. The bolt holes in the plate are more like slots to permit fitting different housings. Often they don't like to line up perfectly, but work OK. These are the only ones I have seen and they do seem to be original equipment.

[Log in to Reply]  [No Email]
Terry Nelson

08-11-2002 19:12:48




Report to Moderator
 Re: Re: Mounting PTO Covers on SC and 500B (511B) in reply to RobertTX, 08-08-2002 06:44:23  
Thanks, Robert. Looked at Cases this weekend at the Almelund Threshing Show, MN, and I can see that I need two of the plates, one for each of my tractors.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy