Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Draft-O--Matic question

Welcome Guest, Log in or Register
Author 
FiremanJohn

03-11-2006 17:25:24




Report to Moderator

I have an 830 High Crop diesel and can not get the three point hitch arms to raise. My other tractor is a 411B (quite an upgrade, huh?) and the three point levers are easy. I did notice that my 830 has no wishbone springs, could this cause the problem? I notice that if I leave the lever in the back position, a few laps around the field and they will be up most of the way. I think I need to understand this before I even get the hydraulic gauge out. Thanks

[Log in to Reply]   [No Email]
FiremanJohn

03-12-2006 09:19:24




Report to Moderator
 Re: Draft-O--Matic question in reply to FiremanJohn, 03-11-2006 17:25:24  
The fluid looks very milky. When I push the lever for either remote I can hear the engine tone change, so fluid pressure moves somewhere, sometime. Just can"t get the pesky arms to move.



[Log in to Reply]  [No Email]
charles kunau

03-12-2006 08:01:53




Report to Moderator
 Re: Draft-O--Matic question in reply to FiremanJohn, 03-11-2006 17:25:24  
first step take a look at your fluid does it look dirty? new filter and oil might solve your problem



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy