Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Pulling 1070

Welcome Guest, Log in or Register
Author 
Tenman

01-24-2002 21:52:00




Report to Moderator

I own a 1070 with a powershift transmission and am wondering how much horse the transmission can handle. I am wanting to pull in the 8500 lb. farm stock classes if I can strip it enough to get in, along with running pressed steel. Also planning on running a 3LM 466 turbocharger. Will the tranny handle 200 or so horse or will the torque limiter slip, or worse. Planning on shifting early under light load and then leaving it there until spinning out or motoring out. Also, does the 1070 engine come with piston oil spray or not. Any info is greatly appreciated.

[Log in to Reply]   [No Email]
nna

01-27-2002 05:09:31




Report to Moderator
 Re: Re: pulling 1070 in reply to brian, 01-26-2002 15:38:24  
Wow! Where can I get a dyno like that?!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy