Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Vac wheels and tires

Welcome Guest, Log in or Register
Author 
wheat straw

09-29-2001 16:05:18




Report to Moderator

I'm wondering if you go from the 32" tires to the 28" tires and wheels if a 1952 vac with a factory adjustable wide front end would be high in the front. I don't want to spend the whole day going up hill. I would like to go to a "modern" tractor but will have to round up some parts to make this one work. has anyone done this and how did it work out. would like to know before i try it.




[Log in to Reply]   [No Email]
Dan C

10-02-2001 06:38:56




Report to Moderator
 Re: vac wheels and tires in reply to wheat straw, 09-29-2001 16:05:18  
I have a VC with the 32" tires and wheels, and a VAC with 12.4?-28 and a VAC with 14.9-28 tires. The 14.9-28s are pretty close to the 32" tires in height. If you want, I will send you a measurement of both to let you know the exact sizes. The 14.9 tires are on a VAC-14 with an adjustable front end. It seems to sit pretty level.



[Log in to Reply]  [No Email]
wheat straw

10-02-2001 16:31:06




Report to Moderator
 Re: Re: vac wheels and tires in reply to Dan C, 10-02-2001 06:38:56  
dan,
I would appreciate it very much. If you dont mind measure from the ground to the center of the axel on each of these. I think i may have a solution here. just e-mail me. thanks



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy