Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

vac-14 new addition

Welcome Guest, Log in or Register
Author 
j stice

05-13-2008 16:29:48




Report to Moderator

third party image

hi all,
just got 2nd vac-14,this is a wide frt with a loader of some kind[trip bucket].
straightened out firing order[lol],wiring,cleaned grubs out of carb, fired it up and drove it!. now does anyone stock the very frt ujoint coming out of steering unit?i cannot read the numbers quite from skipjacks online manual.
need top steering shaft from last ujoint to steering wheel also[was welded on] there is a bracket in frt of rad on this one,with a left bolted on bracket goes thru grille,lights maybe?my narrow frt i think had lights by side panels.
the loader was piped into rear eagle pump.a mess, maybe i can find a superior or such that is hyd bucket and cut off pcs to update this one, since it fits vac pretty well,thoughts?
anyway,the bug bit again,

[Log in to Reply]   [No Email]
Larry59

05-14-2008 05:10:50




Report to Moderator
 Re: vac-14 new addition in reply to j stice, 05-13-2008 16:29:48  
I needed that brake down on steering myself. Thanks for sharing it.



[Log in to Reply]  [No Email]
j stice

05-13-2008 20:21:50




Report to Moderator
 thanks mj!! in reply to j stice, 05-13-2008 16:29:48  
my printer is fritzed so this is a BIG thank you!
i hope that little ujoint is still avail!
any thoughts on the make of the loader?



[Log in to Reply]  [No Email]
mj

05-13-2008 19:50:01




Report to Moderator
 Re: vac-14 new addition in reply to mshultz, 05-13-2008 16:29:48  
Oh, if you print out the sheet you need on an 8.5 x 11 it will be even larger.



[Log in to Reply]  [No Email]
mj

05-13-2008 19:46:50




Report to Moderator
 Re: vac-14 new addition in reply to Tom Railsback, 05-13-2008 16:29:48  
Does this help?

third party image

If you click on an image in the album it enlarges to 'Large' on another screen and then you can go to extra large by clicking on the 'X-Large' link at the bottom of that page. :)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy