Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Sizing a Disc for my tractor

Welcome Guest, Log in or Register
Author 
RD TX

04-13-2008 05:35:35




Report to Moderator

I have a Case 1594 with a 97 hp diesel engine. Can anyone tell me how big of a disc i can use. I am just looking for a rule of thumb.

Thanks,

RD




[Log in to Reply]   [No Email]
Walt davies

04-14-2008 10:25:58




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
You have plenty of power but without the duals you can figure about 2/3 of what you should be able to pull.
Walt



[Log in to Reply]  [No Email]
Gary Smith

04-13-2008 09:58:51




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
For many, many years I pulled a 12Ft. tandem disk with 18" blades with a "800" Case. The "800" is rated at 47-50 HP with 15.5 X 38" tires loaded with fluid. No duels. We have heavy black soil here in Minn. It was a big load for it but she pulled it. Still have the tractor and disk. My dad bought them new in 1958.



[Log in to Reply]  [No Email]
RD TX

04-13-2008 07:42:13




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
I do not have duals but I have fluid in the wheels. My ground is sandy with a good stand of Bermuda grass. The ground is very rough. Given this does the 6 hp per foot still hold or do I have to back down on the footage?

Thanks,

RD



[Log in to Reply]  [No Email]
Allan In NE

04-13-2008 09:13:44




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 07:42:13  
RD,

That 6-hp figure is just a "guesstimate" starting point.

The sandier your soil, the harder it's gonna pull because of the "bite".

However, all things considered, I'd sure think that your tractor would easily handle a 15 or 16 foot disc.

Allan



[Log in to Reply]  [No Email]
Dairy Farmer in WI

04-13-2008 07:22:24




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
my 970 is rated at about the same as yours and i can pull a 16 foot disc with no problem...just as long as you have duals. they poot more power to the wheels.
DF in WI



[Log in to Reply]  [No Email]
Larry59

04-13-2008 06:18:14




Report to Moderator
 Re: ???? Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
So if 6 hp for one foot of disc. Then my case is a 30 hp. So I should rate it with a 4 ft wife tandem disc?? Been looking at some disc myself lately and wondering what I can do or not do.



[Log in to Reply]  [No Email]
Gene Dotson

04-13-2008 06:03:43




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
In our soil here in western Ohio for a finishing disc would be a 16' to 18' wide. Will usually require dual wheels.

For heavy cutting or plowing disc would be 11' or 12' also with duals.

This is assuming at least 18.4X34 tires and weights or fluid in tires.

Nebraska test rating on this tractor shows a maximum of 85.9 horsepower... Gene



[Log in to Reply]  [No Email]
Allan In NE

04-13-2008 05:54:30




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 05:35:35  
6 hp per foot of cut on a standard tandem disc is the general rule.

Allan



[Log in to Reply]  [No Email]
RD TX

04-13-2008 06:00:22




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to Allan In NE, 04-13-2008 05:54:30  
Great!

Thanks for the information,

RD



[Log in to Reply]  [No Email]
garytomaszewski

04-13-2008 08:25:30




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to RD TX, 04-13-2008 06:00:22  
Where does 6HP come from? For many many years drug an 8foot IH disc and two 41/2foot. harrow sections behind an F20 without dual or weighs



[Log in to Reply]  [No Email]
steveormary

04-13-2008 14:26:49




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to garytomaszewski, 04-13-2008 08:25:30  
Could pull an MH 15'tandem with barharrow with my 706(70hp?). Could have used a set of duals at times.

steveormary



[Log in to Reply]  [No Email]
Tom Railsback

04-13-2008 19:54:11




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to steveormary, 04-13-2008 14:26:49  
My dad occasionally pulled a 12 foot Krause with his 1949 DC. Granted, it was a load, but the tractor would do it.



[Log in to Reply]  [No Email]
steveormary

04-13-2008 20:09:01




Report to Moderator
 Re: Sizing a Disc for my tractor in reply to Tom Railsback, 04-13-2008 19:54:11  

Also pulled an 11'tandem with the Super M. That was all it wanted.

steveormary



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy