Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Case L

Welcome Guest, Log in or Register
Author 
patsdeere

03-10-2008 19:25:45




Report to Moderator

Sorry, but this is going to be long.
I just got my 31 L. I was digging into it and have some questions.
1. Where can I find a parts manual? I didn't see it listed on the Case/IH parts lookup program.
2. What type of mag should there be on it? (mine has the tag missing)
3. In the air intake part of the manifold there are 2 drain valve things (like in the bottom of a carb)- what are they for?
4. Did these things come with an oil guage?
5. On the side of the block (mag side) there are 2 bolt like things just below where the head gasket is, what are they for?
6. What is the spark plug that is supposed to be in the thing?
7. On the rear wheel there is a dirt clod declodder, is there supposed to be one on each side?
8. What carb is on this thing and where do I find a carb kit for it? (it is huge)

What do I need to check before I start the beast?

As always, thanks.

[Log in to Reply]   [No Email]
combinekid

03-11-2008 23:40:45




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 19:25:45  
Hey I think maybe I can help you on the spark plugs. (If the plugs are the same as the LA and I think they are). The LA uses the really big plugs also. I looked in my file folder of recepts on my LA. I bought new plugs for mine about a year ago. They were Autolite plugs and the part# is AUT-3076. They cost me $3.08 a piece. The autoparts store had them in stock. Hope this helps



[Log in to Reply]  [No Email]
L.C.Gray

03-11-2008 18:54:40




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 19:25:45  
If it's a '31, your serial number should be 3xx4xx.

For manuals, watch e Bay. You can find both originals and reprints pretty regularly. They have different editions and print dates that cover a set range of serial numbers. Look closely at that if you want the one that is correct for your exact model, although any of them are close enough to help you on most things.

If the huge carb is brass, it's should be a Kingston L-3 and theres really not much to them at all. Not much in the carb to kit, as long as the float's in good condition all the rest is pretty much just a clean and reassemble operation.

Oil gauge (if equipped) on lwr rt fwd corner of the fuel tank.

If the mount holes right below the top of the block are about centered and are tapped 1/4 NC, thats where the insulated block that held the plug wires in place and order was mounted.

Should be a scraper on each side if equipped.

[Log in to Reply]  [No Email]
Steve (DE)

03-11-2008 10:33:14




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 19:25:45  
First you need to know the year. If there is a toolbox, then there is a plate on the toolbox with a number. Post it here and someone will tell you what it means. If no toolbox, then on the left side of the engine, on the block about 4" back from the front and just down from the head is a flat place with the serial number stamped on in large numerals. You can get parts manuals from the sponsors of this site. Look up towards the top of the page for a link.

[Log in to Reply]  [No Email]
patsdeere

03-10-2008 20:08:44




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 19:25:45  
One other question I forgot.
Why does the tank have 2 caps, but only one outlet?
Thanks.



[Log in to Reply]  [No Email]
Walt davies

03-10-2008 22:12:34




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 20:08:44  
There are two outlets the other one is one back side of the tank about middle.
The reason is it has two tanks a 2 gallon for gasoline and 31 gallon for kerosene. You started it on Gas and when warm changed it over to gas. But most have been changed to run only on gas as Kerosene is hard to come by now.



[Log in to Reply]  [No Email]
Gene Dotson

03-10-2008 20:04:16




Report to Moderator
 Re: Case L in reply to patsdeere, 03-10-2008 19:25:45  
Maybe I can answer a couple of questions.
First of all, most LA parts will fit on the L.
The valves on the intake are likely vaccuum ports to run a milking machine.
Magneto should be a MJA 4C112.
If the oil gauge is like a CC, it is a spring loaded plug that comes out on the side of the lower block and pushes out with oil pressure.
My LA mounts the oil filter on the studs on the right side.
Carburetor is a Bendix K6a O-8717 or O-8714, Same as LA.
Can't help with the spark plugs, been too long since I bought them.
Hope this helps... Gene

[Log in to Reply]  [No Email]
L.C.Gray

03-11-2008 18:36:41




Report to Moderator
 Re: Case L in reply to Gene Dotson, 03-10-2008 20:04:16  
If the L is really a 31 model, it should have had a Robert Bosch FU4 magneto, not an American Bosch MJA and a big brass Kingston L3 carburetor, not a Bendix K6. 29 to 34's were so equipped, Mag and Carb changes were amoung the many changes in '35.

Oil gauge is mounted on right side bottom corner of the fuel tank.

If the mount holes right below the top of the block are about centered and are tapped 1/4 NC, thats where the insulated block that held the plug wires in place and order was mounted.

I bought plugs here while back for miy 29, but can't remember what they are besides really big. They weren't hard to find though, even out here in po-dunk-ville.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy