Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

CASE7240

Welcome Guest, Log in or Register
Author 
gavin tully

02-29-2008 14:01:44




Report to Moderator

I Have a 6ta-830 cummins in desperate need of tappet clearance setting, can anyone tell me the correct gap? thanks.




[Log in to Reply]   [No Email]
Nebraska Kirk

02-29-2008 17:17:27




Report to Moderator
 Re: CASE7240 in reply to gavin tully, 02-29-2008 14:01:44  
A Case 7240? Interesting, Case made a 40-72 back in the 1920s. :-)



[Log in to Reply]  [No Email]
corey c

02-29-2008 14:31:39




Report to Moderator
 Re: CASE7240 in reply to gavin tully, 02-29-2008 14:01:44  
Intake .012
Exhaust .024

When engine is top dead number one set the following.. cyl #1 Int and Ex. Cyl #2 int
Cyl #3 ex Cyl #4 Int Cyl #5 ex

When engine is at top dead on number 6 set the following..Cyl #2 ex Cyl #3 Int Cyl #4 ex Cyl #5 Int Cyl #6 Int and EX



[Log in to Reply]  [No Email]
gavin tully

03-02-2008 01:47:40




Report to Moderator
 Re: CASE7240 in reply to corey c, 02-29-2008 14:31:39  
thanks for your help.two of the inlet valves were at least 2mm and one exhaust was tight.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy