Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Case 430 Hydraulic system

Welcome Guest, Log in or Register
Author 
Don Rudolph

02-02-2008 14:39:09




Report to Moderator

Is there a filter for the hydraulic system on a late model 430? I have looked and looked and can't seem to find one. I did find the power steering filter, so I'm not completely dumb. Don
PS my owners manual did not arrive yet and I am too impatient to wait for it. Thanks, Don




[Log in to Reply]   [No Email]
J Heitkemper

02-03-2008 18:13:59




Report to Moderator
 Re: Case 430 Hydraulic systemSteering Filter location in reply to Don Rudolph, 02-02-2008 14:39:09  
Hey Don , What year is Your 430? We have 2 here with hydrostatic steering that are 66 models and have NEVER changed them , becaause i Never Did SEE them., No problems in 40 yrs ,,but probably wouldnt hurt to change the filter ,Thanx ,Jim



[Log in to Reply]  [No Email]
Don Rudolph

02-03-2008 20:28:11




Report to Moderator
 Re: Case 430 Hydraulic systemSteering Filter location in reply to J Heitkemper, 02-03-2008 18:13:59  
Sorry Jim,
I didn't read the title of your post carefully. The power steering filter is in the canister that holds the power steering fluid. The nut comes off the end by the filler pipe and the body comes off and inside there is a little filter element. Don



[Log in to Reply]  [No Email]
Don Rudolph

02-03-2008 18:44:19




Report to Moderator
 Re: Case 430 Hydraulic systemSteering Filter location in reply to J Heitkemper, 02-03-2008 18:13:59  
Jim,
Believe me, when I went to NAPA for filters they said, Do you want a power steering filter for it? And I said I don't think it has one and they said, It absolutely does and they were right! Same with the hydraulic filter. They just didn't know where to put them. I am sure that neither were ever replaced before. My 430 is a 1969 low profile model with exhaust pipe going down. It was bought from a local Case dealer for an orchard tractor. Rumor has it that the Case dealer would sell the 430 as a "530" by turning up the injection pump, thereby saving the customer hundreds of dollars. Don

[Log in to Reply]  [No Email]
J Heitkemper

02-04-2008 07:16:17




Report to Moderator
 Re: Case 430 Hydraulic systemSteering Filter location in reply to Don Rudolph, 02-03-2008 18:44:19  
430 as a "530" by turning up the injection pump. Hi Don,, Thanx for info on the filter , Those NAPA guys are good ,, FYI ,,Dads 430 is a DEMONSTRATOR ,, And a wonderful tractor it is , Back in the early 70s whiletrading Work with a a neighbor . He had a gasser 4020 DEERE pulling 4/16s , the 430 had 3/12s and would match it Round for Round . until the DEERE had to stop for fuel ,, What A GUTSY little Tractor !! Around 7500 hrs in 1978 I overhauled the motor,, Funny thing is When I went to put the new sleeves in They literally fell right thru the motor !!!, Had to go back and make the CASE Dealer sratch his Head, Then He wanted to trade us tractors for a make believe D Brown !. CHEERS ! Jim

[Log in to Reply]  [No Email]
bradley martin

02-02-2008 17:01:37




Report to Moderator
 Re: Case 430 Hydraulic system in reply to Don Rudolph, 02-02-2008 14:39:09  
Hydraulic oil filter is located on the left hadn side above where the hand clutch enters the torque tube. You need to remove the steel hydraulic line that uns across the top of the transmiccion case. Where it attaches below the hydraulic valves is a cap w/ 4 bolts. Remove the bolts and the cap and the filter is there. It is cylindrical..about 2" x 7".



[Log in to Reply]  [No Email]
Don Rudolph

02-02-2008 19:40:07




Report to Moderator
 Re: Case 430 Hydraulic system in reply to bradley martin, 02-02-2008 17:01:37  
Thanks! I would not have found it for quite awhile I'm sure. Don



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy