Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

dc pistons

Welcome Guest, Log in or Register
Author 
johndeereman

01-27-2008 12:28:01




Report to Moderator

i know case had several combos for the dc i have 3 7/8 pistons all fuel i know they made 4 inch high compression did they make a 37/8 high compression would like more compression but not wanting to take the time and money to put new sleeves in already have the head shaved as far as it will go




[Log in to Reply]   [No Email]
doug boll

01-28-2008 12:03:11




Report to Moderator
 Re: dc pistons in reply to johndeereman, 01-27-2008 12:28:01  
3 7/8 hi-altitude pistons will not work with the 5576a head unless you machine them one half inch in and 90 thousanths down making a hat shaped dome, been there, done that!!!



[Log in to Reply]  [No Email]
DKase

01-27-2008 14:00:08




Report to Moderator
 Re: dc pistons in reply to johndeereman, 01-27-2008 12:28:01  
The high compression 3 7/8 set is a piston that sticks up about 1/4" above the block. It will only work with the 4570, or 5576 head.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy