Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

Parts for 580B Case backhoe / loader

Welcome Guest, Log in or Register
Author 
Luvthesouth

01-14-2008 16:23:56




Report to Moderator

Help !!!! I need power shuttle parts for a 580B Case BH / LDR. I need seals and brgs. Aftermarket preferred. Need ASAp !!!!! !




[Log in to Reply]   [No Email]
acnky

01-15-2008 16:43:05




Report to Moderator
 Re: Parts for 580B Case backhoe / loader in reply to Luvthesouth, 01-14-2008 16:23:56  
Case website can give case part #"s, but also gives actual dimensions of seals and bearings.Napa or an industrial supply house can supply cheap parts.



[Log in to Reply]  [No Email]
Dwight Billingsley

01-15-2008 17:30:43




Report to Moderator
 Re: Parts for 580B Case backhoe / loader in reply to acnky, 01-15-2008 16:43:05  
Thanks. I located the bearings but still need " hook type seal rings " for the shuttle piston.
Thanks for your reply and help.



[Log in to Reply]  [No Email]
DougM

01-14-2008 18:17:53




Report to Moderator
 Re: Parts for 580B Case backhoe / loader in reply to Luvthesouth, 01-14-2008 16:23:56  
If your in the south you could try these guys
http://www.brokentractor.com/index.html



[Log in to Reply]  [No Email]
Luvthesouth

01-15-2008 09:05:39




Report to Moderator
 Re: Parts for 580B Case backhoe / loader in reply to DougM, 01-14-2008 18:17:53  
Thanks, I will.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea ... [Read Article]

Latest Ad: 800HD moline engine. Very nice condition. Put it back to work or use in a pulling tractor. 3500 [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy