Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

case 580se engine shake

Welcome Guest, Log in or Register
Author 
Joel Locke

12-26-2007 18:26:31




Report to Moderator

I just perchased a 1986 580se. Cranks and idle fin but when I excellerate(driving or neutral) it shakes some is this nomal?




[Log in to Reply]   [No Email]
mel

12-27-2007 11:48:53




Report to Moderator
 Re: case 580se engine shake in reply to Joel Locke, 12-26-2007 18:26:31  
see if you can pry the engine up and down at the motor mounts, have experienced this on many e"s. when you accelerate the engine it feels like the engine is sitting on the frame, sometimes the muffler will actually contact the hood opening from the engine moving around. Post back and advise what you have found. mEl



[Log in to Reply]  [No Email]
Joel Locke

12-28-2007 17:19:11




Report to Moderator
 Re: case 580se engine shake in reply to mel, 12-27-2007 11:48:53  
I went to the Case dealership today and pick up two rubber isulators and istalled them. After adjusting the shuttle linkage it ran great NO SHAKE THANKS A MILLION !!!!! !!



[Log in to Reply]  [No Email]
Joel Locke

12-28-2007 17:19:00




Report to Moderator
 Re: case 580se engine shake in reply to mel, 12-27-2007 11:48:53  
I went to the Case dealership today and pick up two rubber isulators and istalled them. After adjusting the shuttle linkage it ran great NO SHAKE THANKS A MILLION !!!!! !!



[Log in to Reply]  [No Email]
Joel Locke

12-28-2007 17:18:37




Report to Moderator
 Re: case 580se engine shake in reply to mel, 12-27-2007 11:48:53  
I went to the Case dealership today and pick up two rubber isulators and istalled them. After adjusting the shuttle linkage it ran great NO SHAKE THANKS A MILLION !!!!! !!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy