Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

another quick 730 exhaust ferrel question

Welcome Guest, Log in or Register
Author 
INCase

06-29-2007 03:31:50




Report to Moderator

I know the 730/830 intake ferrels are stepped from the larger manifold diameter to the smaller head diameter, are the exhaust ferrels made the same way or are they straight like the 700/800's? Thanks.




[Log in to Reply]   [No Email]
shawnspeed3

06-29-2007 12:30:40




Report to Moderator
 Re: another quick 730 exhaust ferrel question in reply to INCase, 06-29-2007 03:31:50  
yes they are stepped like the intakes...they are just larger....I made my own by making a swaging die to increase the diamiter of some exaust tube ...took a little time but it was way cheaper than the dealer....Is anyone interested in these Items????? I may be able to do a small run of parts. Does any one know if they are still carried by the dealers????? The last ones I bought were 10+ yrs ago, thought I read that the Case dealers no longer list them....my dealer is over an hour away with odd hours...not very convinent. Thank goodness for mail order parts!!! Shawn

[Log in to Reply]  [No Email]
INCase

07-02-2007 13:21:01




Report to Moderator
 Re: another quick 730 exhaust ferrel question in reply to shawnspeed3, 06-29-2007 12:30:40  
Yes. The dealers can get them. A21635 for the exhaust and A21634 for the intake. Ordered 2 of each. almost $15 each. They were only $10 about 3 years ago.



[Log in to Reply]  [No Email]
Jim B

06-29-2007 05:26:41




Report to Moderator
 Re: another quick 730 exhaust ferrel question in reply to INCase, 06-29-2007 03:31:50  
Not sure. But when I fitted an 830 intake/exhaust manifold assembly to our 800 Gasser I needed to machine/make all six ferrules, with an offset. Of course, Intake and Exhaust required different sizes.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy