Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Case 930 head gasket

Welcome Guest, Log in or Register
Author 
Robert 1

04-09-2007 21:43:34




Report to Moderator

pulled one head on my Case 930 propane and the parts book shows "O" rings for oil and for coolant. Are these to be placed in addition to the head gasket? If so, where. I see no evidence of them on the head or the block




[Log in to Reply]   [No Email]
CNESLER

04-10-2007 04:24:46




Report to Moderator
 Re: Case 930 head gasket in reply to Robert 1, 04-09-2007 21:43:34  
It takes three o-rings per head. They go into
the push rod side of the head one on each end and one in the center is a little closer to the cylinder
CNESLER



[Log in to Reply]  [No Email]
bradley martin

04-10-2007 03:11:12




Report to Moderator
 Re: Case 930 head gasket in reply to Robert 1, 04-09-2007 21:43:34  
Most new gasket sets do not use the separate O-rings originally called for.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy