Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Yuma Auction, Case 400 Diesel

Welcome Guest, Log in or Register
Author 
Ken in AZ

03-04-2007 18:26:24




Report to Moderator

I still have to drag it home, but I found a forlorn looking Case 400 Diesel that I thought might be a nice addition around here. Having absolutely no knowledge of the 400 series (all I have are various D's) I don't know what I got myself into.

Any weak points to watch out for? This one's been sitting awhile and the tires aren't in great shape. The engine seems to be stuck but I didn't try very hard to see if I could move it. It's been sitting awhile but at least the exhaust was covered (looked like it had been in that location for at least 5+ years).

The fenders are pretty well shot; they look like they're rusted so I figure the tractor came from someplace quite distant. It looks like it has rice tires on it and someone painted all of it IH red (like I said, it looked pretty forlorn).

This one has an eagle hitch. It also looked like someone built up some sort of attachments to the sides if the tractor (like it had a homebuilt loader or something) but those will come off as soon as I get it home. If I can get it to run it'll probaby get a shot of paint and get put to light duty pulling a wagon for my hayrides (and maybe a plow if I can find one of those someplace).

Anyway, thoughts, comments etc? I didn't write down the serial number but what years were they made?

Thanks,

Ken in AZ

[Log in to Reply]   [No Email]
530puller

03-05-2007 15:08:26




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to Ken in AZ, 03-04-2007 18:26:24  
How was the auction out there in Yuma? I heard Hi Crops went for big bucks.



[Log in to Reply]  [No Email]
Ken in AZ

03-05-2007 15:44:33




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to 530puller, 03-05-2007 15:08:26  
It was typical of an auction, I would think. The first one of anything went higher than the rest of the same type, and each subsequently averaged less. Most of the high crop tractors went a little high. I thought about bidding on a DCS but it was real tired and missing a few parts I didn't think I could find (like a hitch). It went for $350 but most of the rest of the high crop ones I looked at were going for more, usually a grand or more. The thing to remember is that here in AZ tractors are generally more rare than they are in the midwest and as such they tend to go for higher prices. There were some crazy high prices on some of the equipment. I thought about picking up a crossmotor case but the one that was missing some parts, had the manifold rotted off and had a hole out the side of the block still went for over $3K. I want to say it was a 12-25 or thereabouts (12-something anyway). There was a Massey 97 (FWA) that went for $4750; Dad bought one just like it 25 years ago for $350 for the tires. Then others would turn around and have a hard time getting $100 for the first bid.

There was a VAIW that I looked at. It was missing the radiator, hood, water pump, seat and some other parts. It went for $1700. I talked to the guy and he figured he had measured the parts close enough to verify he had the rest of the parts he needed to make it work but then he has to move it and hope he can get the remaining parts and that they all fit. Looked a bit risky for me.

There also was a factory LP LA (several, in fact) that went for various prices... $350 (earlier) to $800 (1952 model, from what one of the guys said), if I recall. So it would vary, depending on what some folks wanted.

There was a cute little 310 Case crawler I thought about bidding on too. It went for $1300, I think, and it had the rear cover off it and the driveshaft from the clutch to the transmission was out (in the toolbox, from what the winning bidder mentioned afterward). It looked like it needed a lot of TLC but it was straight.

I also thought about bidding on a DC-LP but after looking, it wasn't all it looked. The engine serial number was a 1950 but the back end was a '52 and had the eagle hitch. The head was the same as one of the vineyard models on gas (5505, I think). I thought maybe I could use the eagle hitch but the tractor went for over $1100 and I wasn't going to go that high for it.

It WAS a lot of fun though. There were a lot of toys that went for really foolish money though too. The pedal tractors went for more than a lot of the real ones, and I thought that was just wrong. Certainly a learning experience.

Ken in AZ

[Log in to Reply]  [No Email]
flying belgian

03-05-2007 05:54:28




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to Ken in AZ, 03-04-2007 18:26:24  
The 400 was a very well built and reliable tractor. It's weekest point was probably the hydraulics. and rear axles with mounted picker.



[Log in to Reply]  [No Email]
iluvcase

03-04-2007 18:36:08




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to Ken in AZ, 03-04-2007 18:26:24  
1955;56; &1957



[Log in to Reply]  [No Email]
Ken in AZ

03-04-2007 20:25:59




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to iluvcase, 03-04-2007 18:36:08  
Thanks!

Ken in AZ



[Log in to Reply]  [No Email]
wayne2

03-04-2007 20:58:46




Report to Moderator
 Re: Yuma Auction, Case 400 Diesel in reply to Ken in AZ, 03-04-2007 20:25:59  
I got a frose up 400com for 300$,It was painted Green of all things-being a tug w/cab I painted it Flat black,with silver piping on edges-added a piece of pipe on hood added a bell and spoked the wheels took twin granddaughters in parades until it wasn't cool any more-still kicking self for selling my 400 triple range-ag but still have 300 round nose in shed. No worries be happy!!! Wayne



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy