Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum

SC sleeves?

Welcome Guest, Log in or Register

03-03-2007 09:24:39

Report to Moderator

I stopped by the case/IH dealer yesterday and 3 5/8 inch SC sleeves are now obselete. I have seen whole rebuilt sets elsewhere on the internet, but I just need 1 sleeve. Any other sources? I just need 1 and even a used one would be OK.

[Log in to Reply]   [No Email]
John Saeli

03-03-2007 19:07:23

Report to Moderator
 Re: SC sleeves? in reply to dwell5, 03-03-2007 09:24:39  
We stock new 3 5/8" sleeves for SC's before ser. # 8027115. Sleeves are not available for the later block. If the sleeve isn't broken, it can have a liner installed.

[Log in to Reply]  [No Email]

03-05-2007 16:49:34

Report to Moderator
 Re: SC sleeves? in reply to John Saeli, 03-03-2007 19:07:23  

Thanks! I am still searching your site for the sleeve- is it listed in the A and I section?

[Log in to Reply]  [No Email]
H. Moyer

03-03-2007 10:22:24

Report to Moderator
 Re: SC sleeves? in reply to dwell5, 03-03-2007 09:24:39  
Try John Saili.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea ... [Read Article]

Latest Ad: 800HD moline engine. Very nice condition. Put it back to work or use in a pulling tractor. 3500 [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy