Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Splitting Stand test run (pic)

Welcome Guest, Log in or Register
Author 
Kestrel in CT

02-17-2007 19:26:25




Report to Moderator

third party image

If anyone is thinking of splitting their VA, here is something I cobbled up and used for the first time today to remove the rear end and maybe the transmission tomorrow. Seems quite secure so far. Nothing tipped over anyway.

It consists of 2" square stock for the cross brace and 1 1/2" square stock for the two legs. I bolted the cross piece to a flange on top of the torque tube. A friend TIG welded two short pieces that the legs slide through.

Drilled a couple of holes and secured 'em with hitch pins from Tractor Supply. I saw the design in my service manual and gave it a shot (but also threw some timbers underneath just in case.)

If anyone wants to see more photos, shoot me an e-mail. Happy splitting.....

[Log in to Reply]   [No Email]
mj

02-18-2007 10:06:24




Report to Moderator
 Re: Splitting Stand test run (pic) in reply to Kestrel in CT , 02-17-2007 19:26:25  
third party image

Roger that.



[Log in to Reply]  [No Email]
Kestrel in CT

02-18-2007 11:01:36




Report to Moderator
 Re: Splitting Stand test run (pic) in reply to mj, 02-18-2007 10:06:24  
third party image

Wow ! I thought I had a big project. Good luck. That engine hoist looks awful pretty. Yours or a rental ?
That item could be my next acquisition. My transmission doesn't want to slide out as easily as the rear end. I need some help from up above like you have.

[Log in to Reply]  [No Email]
mj

02-20-2007 08:54:28




Report to Moderator
 Re: Splitting Stand test run (pic) in reply to Kestrel in CT , 02-18-2007 11:01:36  
My cherry picker, $150 on sale from HF.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy