|
| |
| Case Tractors Discussion Forum |
Slow hyd on 970
| Author |
|
|
Moline_guy
02-15-2007 12:54:53
|
Neighbor has a 970 on a loader and the other day hydraulics from tractor controls to loader got slow, he has some oil coming out of oil breather back on pto housing towards the top. Brakes and steering work fine and hyd pump is about a year old and oil is clean and at level it is suppose to be any ideas where to start looking, thanks for any replies.
|
|
|
|
tom stanley
02-15-2007 18:37:53
|
|
Re: Slow hyd on 970 in reply to Moline_guy, 02-15-2007 12:54:53
|
|
| |
check screen on pump intake to get to it remove pto unit also could be flow divider valve has foreign material if this is cause replace screen on in take I never change a pump without changing screen....... tom PS my e-mail stuck now sorry
|
|
|
|
c hess
02-16-2007 08:54:37
|
|
Re: Slow hyd on 970 in reply to tom stanley, 02-15-2007 18:37:53
|
|
| |
OffTOPIC BUT MY E MAIL IS ALSO STUCK. A ny else having problem?
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Massey Ferguson 35 (and up) Tractor Assembly Notes - by Jack Wetmore. These assembly notes are for Massey Ferguson tractors with a two stage clutch and 6 speed, 8 speed and mutli-power transmissions. I see a lot of discussion forum messages regarding damaged clutches from improper assembly. The objective is to have the engine and transmission slide together safely and easily until the gap between the two halves is less than 1/4", BEFORE tightening any of the bolts holding the two together. Using bolts to draw the two halves together will damage the PTO
... [Read Article]
Latest Ad:
combine ih 303 403 101 151 503 615 with grain plat header control
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
