Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

dc head question

Welcome Guest, Log in or Register
Author 
johndeereman

02-02-2007 14:57:10




Report to Moderator

i have a dc witth the 5576a head on it is this a good one for pulling i know its not an lp head also what angle are the valves im going to grind the seats and need to know what stone to buy thanks




[Log in to Reply]   [No Email]
DCPULLER

02-03-2007 07:13:46




Report to Moderator
 Re: dc head question in reply to johndeereman, 02-02-2007 14:57:10  
I have one to sell with all the bells and whistles if interested. 4020 valves, ported, shaved, and o-rings installed. Also have high flowing tube intake and big carb. Dave S



[Log in to Reply]  [No Email]
dboll

02-02-2007 18:31:03




Report to Moderator
 Re: dc head question in reply to johndeereman, 02-02-2007 14:57:10  
good head with big displacement, should be 45 degree angle



[Log in to Reply]  [No Email]
mikes600

02-02-2007 17:32:12




Report to Moderator
 Re: dc head question in reply to johndeereman, 02-02-2007 14:57:10  
That's a good head if you shave it 70 to 100 thou.
Not sure about the angle.I have a LP head if you need it. Thanks Mike



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy