Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

vac-14 floorboard

Welcome Guest, Log in or Register
Author 
j stice

11-16-2006 05:53:56




Report to Moderator

hi all, and many thanks to john,ira, roberts tractor,walt,and ed, who together have helped enuff the old gal may MOVE under power this weekend ! my question this day is the left low style floorboard for vac-14.if anyone might have such please let me know as inquiries so far are no joy, BUT i was wondering if the older "top level" style were big enuff to cut out a smaller vac-14 one out of? you all know my search for downward elbow and muffler... i have nothing dimension wise to guess/base this floorboard question from, it just appears in photos as possible?
thanks again to all on the board,
jerry

[Log in to Reply]   [No Email]
mj

11-16-2006 16:35:09




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 05:53:56  
Check the link.



[Log in to Reply]  [No Email]
Walt Davies

11-16-2006 13:48:29




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 05:53:56  
Thanks Jerry I think most of us are alway glad to help a fellow Case owner.

Walt



[Log in to Reply]  [No Email]
JGarner

11-16-2006 13:13:35




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 05:53:56  
There are VAC floorboards on ebay right now. I think they were listed about Nov 11-13. I remember seeing them while looking at newly listed items 2-3 days ago. These might work if they don't sell for an arm and a leg.



[Log in to Reply]  [No Email]
Jerry W

11-16-2006 12:45:57




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 05:53:56  
My dad has a 1954 VAC14. I could go measure and photo left floor board if you like.

Jerry



[Log in to Reply]  [No Email]
j stice

11-16-2006 13:05:20




Report to Moderator
 Re: vac-14 floorboard in reply to Jerry W, 11-16-2006 12:45:57  
jerry w,
that would be great!
might your tractor reveal how the under exh looks[nothing here ]. i have no leads on pipes or muffler, nor know if any brackets under there are gone.to take this to closest muffler shop on a truck will cost 150.00 so will attempt to do here somehow without the transport charge.
john s suggested to convert to top elbow/muffler,etc, but i saw a pic of a top elbow and it has 2 mounting holes that obviously this tractor doesn't have whatever bracket that might require.the -14 is just enuff to be quite frustrating!
thanks for offer to help,
jerry

[Log in to Reply]  [No Email]
Jerry W

11-18-2006 18:33:08




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 13:05:20  
Here is a link to the pictures. I hope it works. It is a little hard to see because the tractor has a loader on it. If you send me your address I could send a sketch with dimensions.

Link

Also a photo of my 1952 VAC-13 with under exhaust.

These VAc 14 floorboards are wider but have the same furled edge as an other VAC floorboard.

Jerry

[Log in to Reply]  [No Email]
Jerry W

11-16-2006 20:14:11




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 13:05:20  
I'll also look see if I think a high platform floorboard can be modified to work. Those high floorboards bring next to nothing on eBay. I also have about 3 or 4 sets of them lying around but none of the low ones.

Jerry



[Log in to Reply]  [No Email]
Jerry W

11-16-2006 20:10:41




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 13:05:20  
The VAC 14 of my dad"s does not have the under exhaust. I have a VAC 13 that does but it has been replaced from the elbow down and back. At least that is what it looks like to me. I"ll try and take pictures of both later tomorrow.

Jerry



[Log in to Reply]  [No Email]
amo

11-16-2006 11:02:52




Report to Moderator
 Re: vac-14 floorboard in reply to j stice, 11-16-2006 05:53:56  
I went to a welding shop and bought a piece of damond plate and made a floorboard for the right side of a vas. Metal was under $20.00. Good luck.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy