Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC rd Gear

Welcome Guest, Log in or Register
Author 
Glenn FitzGeral

11-15-2006 17:31:25




Report to Moderator

As many of you know I have made a deal on a VAC 14 over in Michigan. I haven't had any experience with VAC's. A different one I was "looking" at down in Indiana, the owner said it was noisy in 3rd gear. Is this a common problem? It seems I've heard they are a little weak in the pto, but is the transmission a weakness? The fellow in Michigan has been very fair with me, answering all my questions (and few people can ask questions like I can) and sending me countless pictures. I couldn't expect more from him. I plan on going over with the truck/trailer in a couple months. I just don't want any big unpleasant surprises.

Thanks Glenn F.

[Log in to Reply]   [No Email]
MARTIN IN DE.

11-17-2006 09:53:03




Report to Moderator
 Re: VAC rd Gear in reply to Glenn FitzGerald, 11-15-2006 17:31:25  
Glenn,dad bought a VAC 14 in 1959 it was used hard on the farm for 10 years and never gave any problems.It was one of the best tractors that dad had,it replaced a 1948 DC that dad bought new. the salesman told dad he would never be happy with the smaller tractor, but dad loved the VAC 14. BTW it was a narrow front tractor, The gearing is different than the 12s and 13s,third gear is about the same as second in the 12s and 13s or I should say, dads was.

[Log in to Reply]  [No Email]
GeoMo

11-16-2006 05:06:56




Report to Moderator
 Re: VAC rd Gear in reply to Glenn FitzGerald, 11-15-2006 17:31:25  
I have had my VAC since the mid 50's.
It has the 3rd transmission.
Back then it call for 140# oil and cut with kerosene in winter time. Dad never added kerosene and oil would be so thick that the gears cut channels in it.
I use 80/90 and 3 rd gear has make noise since I started using the VAC 30 years ago.
I have trouble with water getting into transmission and carberator.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy