Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

case 430 bad tranny leak

Welcome Guest, Log in or Register
Author 
kdok44

10-30-2006 16:28:29




Report to Moderator

hi i have a case 430 1969 gas It is leaking transmission fluid pretty good. The question is it is leaking from where the brake houseing cover is. Is there supposed to be transmission fluid in where the brakes are or is it somehow leaking into the the brakes then out of there onto the ground. Where it is leaking from it almost looks like a built in groove made to leak things out does anyone know whats going on. Id rip it all apart but if i take off the brake houseing will i lose all my tranny fluid and it is really cold out so if i know what i am doing before i do it would be nice Thanks in advance.

[Log in to Reply]   [No Email]
JRT

10-30-2006 20:53:03




Report to Moderator
 Re: case 430 bad tranny leak in reply to kdok44, 10-30-2006 16:28:29  
Transmission oil should not be leaking out there. It should be heavey duty 90 weight oil in the rear end if it is leaking out the brake cover. It is leaking through the differential seal. Take the brake cover assembly off and then you can remove the casing for the differential seal. Remove the old seal and replace it with a new one. It is not a real expensive thing to fix, but it is a little tricky to get the new seal back in without damaging it. While the brake is off you need to check it for ware and you should also get all that oil out of it while you have it off.

[Log in to Reply]  [No Email]
JGarner

10-31-2006 08:02:08




Report to Moderator
 Re: case 430 bad tranny leak in reply to JRT, 10-30-2006 20:53:03  
JRT, got a question on the seal removal. My 630 is still leaking a bit from these seals or the o-rings on the housing the seals sit in. I have obtained both of these from CaseIH but have not put them in. THese seals were seeping and I thought I would try to recondidtion the brake disks and clean all of this area up when I discovered a LARGE amount of water in the transmission/differential housing. Luckily there was still a good amount of oil in there also and it was sitting on top of the heavier water so I don't have any rust.

My question is how do I get the seals out with out pulling the whole brake housing with shafts, etc. or can I? The Case shop manual does not really give a good descrition of how to remove the brake housing and shaft. I tried to get it started out by gently tapping at the joint with a 2 1/2" wood chisel blade but I did not get anywhere. Is there a puller that screws into the cap screw holes or something?

[Log in to Reply]  [No Email]
JRT

10-31-2006 21:10:44




Report to Moderator
 Re: case 430 bad tranny leak in reply to JGarner, 10-31-2006 08:02:08  
If I remember correctly you have to take the entere brake housing off. When it is unbolted, this also loosens up the differential plate. There may be like one other large screw in the plate before it can be removed.Get the plate loose by tapping something sharpe like a chisel or screwdriver behind it, without damaging the shims behind the plate. There is something like 6 or 7 shims behind the plate. It is easy to damage them if you are not careful. After the plate is loose, it will slip off over the differential shaft. The differentail shaft will drop down but that is o k. You then knock out the old seal out of the plate and install the new one. Slip the plate{with the shims behind it} back over the differential gear without damaging the new seal and reinstall the brake housing. The bolts for the brake housing tightens everything back up. I forgot to mention, you do have to drain the oil down to a level below the brake housing before you do all this stuff.

[Log in to Reply]  [No Email]
JGarner

11-01-2006 06:16:43




Report to Moderator
 Re: case 430 bad tranny leak in reply to JRT, 10-31-2006 21:10:44  
Sounds like you have done this before. I need a bit more clarification.

I went as far as you describe on the take a part and start to work a chisel in between the brake housing and the transmission/differential casting. I was trying to get my big ole flat wood chisel behind it the housing(without damaging the shims) and I got it to move maybe .030"-.035". I didn't seem like it wanted to slip out easily so I stopped and blted everything back up. I had hoped that when I put the new fluid in and ran it up and down the street a bit the leak would stop. It seemed to for a day or two and now it is weeping a bit. Guess I will have to drain about 5 or so gallons out (think that's enough, I kept the 5 gallon lube oil container?) and pull the parts off and replace the seals and o-rings.

Should I work the chisel arond the sides as by going in one spot only I may have cocked the housing and got it in a bind? How hard should the thing be to come out, its only o-ring squeeze and the seal friction which is minimal?

Thanks for good feed back. I will drain some fluid out and try again this weekend.

[Log in to Reply]  [No Email]
J heitkemper

11-01-2006 13:21:11




Report to Moderator
 Re: case 430 bad tranny leak in reply to JGarner, 11-01-2006 06:16:43  
If the seals are broken and leaking bad ,By all means they will have to be replaced ,,However ,,What has worked well at this farm on ALL colors of running Equipment is a Lucas Oil Hub Seal conditioner ,,Not a mechanic in a bottle ,,But well worth a try to keep you from pulling on wrenches under it when you can be driving around astride it , I use the whole line of LUCAS products ,going on 8 yrs , I was cynical at 1st , REAL GOOD STUFF,Not available everywhere ,YOUR NAPA may have it. , If Not , I can hook you up to the line , But then some guys LOVE to tinker and I understand ,,Good Luck ,Jim

[Log in to Reply]  [No Email]
kdok44

10-31-2006 04:35:07




Report to Moderator
 Re: case 430 bad tranny leak in reply to JRT, 10-30-2006 20:53:03  
ahh ok next question it is 80w 90 that i have in the transmission does that also service the differential aswell or are they 2 seperate spots to fill or does filling tranny fill both cause it sure looks like the 80 w 90 i put in the tranny also is the seal like that of an engine seal to the tranny kinda small and round thanks.



[Log in to Reply]  [No Email]
INCase

10-31-2006 05:01:31




Report to Moderator
 Re: case 430 bad tranny leak in reply to kdok44, 10-31-2006 04:35:07  
Another question for you: what does the fluid leaking out look like? Is it heavy gear oil (90Wt) or is it thinner like hyd. fluild? You may have another leak somewhere overfilling the transmission too. (maybe not too)



[Log in to Reply]  [No Email]
kdok44

10-31-2006 05:22:04




Report to Moderator
 Re: case 430 bad tranny leak in reply to INCase, 10-31-2006 05:01:31  
it is heavy i just put 80w90 in tranny and thats what it looks like maybe i should Die it to make sure :>)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy