Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC 14 Questions

Welcome Guest, Log in or Register
Author 
Glenn FitzGeral

10-28-2006 20:51:07




Report to Moderator

I'm looking at a couple 14's. One in particular (serial #6001022), a '54 I'm told, has a solid front axel. I understand they could also come in an adjustable front axel. Were there many other variations/options? What options were considered most desirable?

Thank You, Glenn F.




[Log in to Reply]   [No Email]
Dave Beiter

11-01-2006 08:46:07




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
Go to the photo section of this site and look up my VAC 14 it is a narrow front end.... ORIGINAL, I got it off the original owner that purchased it that way



[Log in to Reply]  [No Email]
Jerry W

11-01-2006 19:49:27




Report to Moderator
 Re: VAC 14 Questions in reply to Dave Beiter, 11-01-2006 08:46:07  
Dave We were not talking about narrow fronts here. We were talking about non adjustable wide axles on a VAC 14. Narrow fronts are fairly common on a Vac 14.

Jerry



[Log in to Reply]  [No Email]
Jerry W

10-31-2006 06:50:37




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
A VAC 14 on ebay - 130042592842 - needs some attention but... Jerry



[Log in to Reply]  [No Email]
Jerry W

10-29-2006 07:40:23




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
Here is a photo of a VAC 14. This is the only configuration I have ever seen them in. I think they were only made in 1953 and 1954.

Link

Here is a photo of a VAC 13 which I much prefer. For a tall guy like me (6'4")it is very hard to get off of a VAC 14 especially if it has a loader and an Eagle Hitch. The big difference is the height of the operators platform.

Link

Jerry

[Log in to Reply]  [No Email]
j stice

10-30-2006 11:55:32




Report to Moderator
 Re: VAC 14 frt end in reply to Jerry W, 10-29-2006 07:40:23  
jerry w,
my vac-14 is frt original row crop . they made'em.



[Log in to Reply]  [No Email]
Jerry W

10-31-2006 06:55:09




Report to Moderator
 Re: VAC 14 frt end in reply to j stice, 10-30-2006 11:55:32  
I still think that if you have a VAC with a solid front axle that it is not a VAC 14. I think the only way they came was with an adjustable wide front or a narrow front. I scanned thru my parts book last night and I see no parts that would allow a solid wide front to be steered on a Universal front bolster.

Jerry



[Log in to Reply]  [No Email]
Jerry W

10-29-2006 07:21:56




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
After thinking about it a little more I cannot believe that a solid axle ever came on a VAC 14. VAC 14's have the Universal steering box built into the front bolster and steer the front end from the center.

Solid axles use the old style box mounted on the torque under the cowl and steer from the left spindle.

Jerry



[Log in to Reply]  [No Email]
Jerry W

10-29-2006 07:15:32




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
I have never seen a VAC 14 with a solid front axle. Not to say didn't exist but usually solid front axles are VA and VAI.

Jerry



[Log in to Reply]  [No Email]
Sam#3

10-29-2006 06:19:26




Report to Moderator
 Re: VAC 14 Questions in reply to Glenn FitzGerald, 10-28-2006 20:51:07  
Go to the 'Case' Title in the grey banner above. Under articles find 'VA profile.' It gives a list and discription of all the VA s.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy