Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

VAC 14 Value...?

Welcome Guest, Log in or Register
Author 
Glenn FitzGeral

10-22-2006 17:15:12




Report to Moderator

I'm always scheeming something. Eventually I want to have the full Flambeau line. I have an SC and a DC. In the photo ads there's a VAC 14 for $1400. I spoke with the fellow this AM. Tractor works very well, is complete, minus top link. 3rd gear a little noisy and engine smokes a little when warmed up. Poor but useable matched tires. What is this little thing worth? Maybe I could figure out a way for it to be mine, but when I jump too quickly I usually regret it. What do you think?

Glenn F.

[Log in to Reply]   [No Email]
C. Amick

10-23-2006 09:33:24




Report to Moderator
 Re: VAC 14 Value...? in reply to Glenn FitzGerald, 10-22-2006 17:15:12  
You may find a better deal on Ebay. I see that there are 2 VAC's up for sale on Ebay right now, one in AL and one in OH. They both have the off-center steering, but only one of them appears to have the low operating platform?



[Log in to Reply]  [No Email]
1031D

10-23-2006 07:24:04




Report to Moderator
 Re: VAC 14 Value...? in reply to Glenn FitzGerald, 10-22-2006 17:15:12  
Glenn, I bought one of mine for $850, with bad tires and smashed tin, but it ran and had a top link. $1800 later it is restored like new and is a handy little guy on the farm. I rebuilt everything front to back, top to bottom, new tires, wheel weights, remote cylinder hookups, all the good stuff. One sold by me a couple months ago on auction with loader, wheel weights, remote valve, and a smashed hood running for $2150.

[Log in to Reply]  [No Email]
GlennF.

10-23-2006 09:33:45




Report to Moderator
 Re: VAC 14 Value...? in reply to 1031D, 10-23-2006 07:24:04  
Any ideas what that noise is in 3rd gear?

Glenn



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy