Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

S C CASE

Welcome Guest, Log in or Register
Author 
J Heitkemper

09-12-2006 06:35:07




Report to Moderator

Does anyone have a All Fuel intake manifold and carburator that will bolt to a SC head ?...THANX Jim




[Log in to Reply]   [No Email]
C. Amick

09-13-2006 09:42:05




Report to Moderator
 Re: S C CASE in reply to J Heitkemper , 09-12-2006 06:35:07  
I just noticed they sell rebuilt carb. on this web site (under Tractor Parts)for $142.



[Log in to Reply]  [No Email]
C. Amick

09-12-2006 09:42:04




Report to Moderator
 Re: S C CASE in reply to J Heitkemper , 09-12-2006 06:35:07  
You will also need the inserts that go into the intake ports, if you are planning on running something other than gasoline. The all fuel carburetor is the same as the gasoline one. They are $182 for a rebuilt one in the V.B. catalog. Do you have the old manfold? If so, I know someone who might be able to repair it.



[Log in to Reply]  [No Email]
J heitkemper

09-12-2006 14:21:29




Report to Moderator
 Re: S C CASE in reply to C. Amick, 09-12-2006 09:42:04  
Big O rings.. More than likely I will need that as well Does anyone know if the design for all fuel is different from Gasoline ,,, Curvature ,,Depth ,and Throat width dimensions,,... ,We have been told they are indeed different ,, As far as a repairable manifold ,,Yes I do have 2 that could be fixed with the masters hands ,,,Wanna give me more info to find that craftsman ? thanx Jim



[Log in to Reply]  [No Email]
george md

09-13-2006 18:59:10




Report to Moderator
 Re: S C CASE in reply to J heitkemper, 09-12-2006 14:21:29  
Jim,

C.amick, sent me an email telling me to check
the board. I was gone all day yesterday and today
do a grade job for a shop for a friend with cranes.
High speed has been down since yesterday , supposed
to be up in the morning.This dial up is slow. I'll put the email in the post , send me some pictures of what you have . Also here is a link to some repair. It is image event , click on the thumb
nail and it will go full screen , click again to
return to thumbnails. There is an SC dual fuel manifold in the pictures
That manifold was quite good , but the heat valve was destroyed ( iron worms ), it would crumble in
your fingers , I made a new one . There is also an
SC gas one in there , it was a little rough and I have another SC here now that I am replacing the
back section of . put a phone # in the email
and I'll call you, if it rains tomorrow I should
be in the shop all day , if it doesn't I'll be
in soon after dark.

george

[Log in to Reply]  [No Email]
C. Amick

09-12-2006 18:34:52




Report to Moderator
 Re: S C CASE in reply to J heitkemper, 09-12-2006 14:21:29  
The design of the all fuel manifold is a lot different, but they all fit the same heads. Post a message on the Case Discussion Board for George in MD. He has a machine shop and has rebuilt the kerosene manifolds. I emailed him and told him to watch the discussion board for a message from you.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy