Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

case 220 hay baler

Welcome Guest, Log in or Register
Author 
Reaver

07-12-2006 15:07:54




Report to Moderator

My father just bought a older case 220 square baler.
Looks to be in good condition.
Where can we get an operators manual for it?
It this a reliable baler?
What is value? Years produced?
We have a round baler, but we usually want a few hundred square bales for calving cows, etc. in the barn. Never ran a sqaure baler...pointers appreciated.
Thanks Reaver




[Log in to Reply]   [No Email]
alliswdman

07-14-2006 04:42:13




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
i have a case 200 baler that we ran for 5 yaers but last yaer we broke the timeing chain and took out needles before that we had problems with tying and shaer pins i,m willing to seell if you want it for parts i have manauls also they are the same as 220 baler not much differents



[Log in to Reply]  [No Email]
Vesperian

06-23-2007 12:04:51




Report to Moderator
 Re: case 220 hay baler in reply to alliswdman, 07-14-2006 04:42:13  
Do you still have the case 200 baler? I need a part for my 200. It is the cast part on the knotter that the arm that pulls the needles in is connected to. It also hold the brake disc.


Joe



[Log in to Reply]  [No Email]
Glen Wright

07-13-2006 19:24:39




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
I sold a bunch of these balers, and had to work on everyone of them. The biggest problem is the chamber is light and if you try to make a heavy bale it will give enough to cause the baler to miss tie. The way we overcame this problem was to reinforce the chamber with strap iron going around the chamber once right behind the knotters and another one about 2/3 a bale length past the knotters. If you do this and get the sweep arm set right as well as the knotters to needles and make a 50-60 lb. bale and don"t crowd it, it is a good baler.

[Log in to Reply]  [No Email]
Braxton Hill

07-13-2006 00:11:57




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
I was wondering if you all would know where a good place to sell or if anyone would be interested in buying a original case/international square baler that came factory with it's own engine mounted on top above the needles? Inline engine. i am still getting the owners manual i have them just trying to find it. I think it was from the 30's or 40's. Thanks



[Log in to Reply]  [No Email]
gary tomaszewski

07-13-2006 16:07:33




Report to Moderator
 Re: case 220 hay baler in reply to Braxton Hill, 07-13-2006 00:11:57  
Braxton, I believe that in the 30's & 40's & 50's & 60's & much of the 70's it would have been a Case OR an International. Perhaps you could post a picture, there are many knowledgeable people here who could help you identify your machine and a pic would make it much easier to estimate a value.



[Log in to Reply]  [No Email]
Braxton Hill

07-14-2006 09:42:35




Report to Moderator
 Re: case 220 hay baler in reply to gary tomaszewski, 07-13-2006 16:07:33  
well i found the owners manual and setup instruction book. The model is International McCormick No. 50-AW pickup baler. I am going to post the photos on the internet and if possible on RFDTV farm channel. I should have it posted within 1-2 weeks. The baler was last used on 1997 and that year i can vouch for baled 1200 bales and only 26 broke my grandpa said. He is letting me sell the baler for my college tuition money. I want it to go to someone that will either restore it or use it but no scrap. It is rare and is very memorable to me. It has baled over the years around 13,000 bales according to my grandpa. Please let me know if anyone has any info or is interested i appreciate it, thanks everyone.

[Log in to Reply]  [No Email]
jcmarleau

07-12-2006 20:20:17




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
I do have a original Operator manual for the 220 baler my e mail is [email protected]



[Log in to Reply]  [No Email]
Engineer20

07-12-2006 18:41:28




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
Your CASE dealer can get manuals.



[Log in to Reply]  [No Email]
amo

07-12-2006 17:59:55




Report to Moderator
 Re: case 220 hay baler in reply to Reaver, 07-12-2006 15:07:54  
for anuals contact the following

rich tworek
customer service
web [email protected]
phone 262-636-7274
fax 262-636-5434
good luck the manuals are very reasonable and are true case ones.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy