Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Allis Chamber 2-14 trip plow parts needed

Welcome Guest, Log in or Register
Author 
Drew1107

11-18-2007 13:46:01




Report to Moderator

Looking for various Allis Chamber 2-14 trip plow on steel plow parts.

#1) Need front landwheel grease cap. Grease cap is threaded but does not have an outside grease sert.
#2) Spring Release hitch #3) Trip side smaller adjusting arm with grip lever
#4) 3 blacksmith 14 inch plow points
#5) Two factory Allis straight rolling coulters with post

Any help locating parts or company/person to contact would be a great help. Can send photos of all the above items I need. Thanks!!

[Log in to Reply]   [No Email]
Garry from SD

11-20-2007 05:29:17




Report to Moderator
 Re: Allis Chamber 2-14 trip plow parts needed in reply to Drew1107, 11-18-2007 13:46:01  
There's going to be an AC plow on an auction close by next Wednesday but no idea what size of 2 bottom it is(I know it's a PT). If you want, contact me via e-mail and I can give you more info on the auction.



[Log in to Reply]  [No Email]
Butch(OH)

11-19-2007 08:05:39




Report to Moderator
 Re: Allis Chamber 2-14 trip plow parts needed in reply to Drew1107, 11-18-2007 13:46:01  
There was three models of 2-14 trip plow with the most common being the number 2 followed by the #4 and #1(rare). Need to know which one it is for the the hub, lever and coulters as they will differ. Two release hitches were used depending on how old the plow is. Plow numbers will not get you correct parts for the bottoms. Need to know your bottom number or part numbers from the back of your old shares. There are no parts at dealers for these plows other than old stock on hand. A good AGCO dealer (hopfully one that used to be an Allis dealer) can search other dealers for old stock parts IF they are willing to do it. Be prepared for severe sticker shock.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy