Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Hotrodding a 45 block,

Welcome Guest, Log in or Register
Author 
Big Dog

10-31-1999 13:16:34




Report to Moderator

Have received e-mail regarding boring out block and installing bigger bore sleeves/pistons and stroking crank.
Anybody out there know of any combinations (sleeve/piston/rods that will work and not drive compression ratio above 7.5,and what displacement would I end up with.
Any help would be appreciated.Thanks!-Big Dog-




[Log in to Reply]   [No Email]
Dave Fullmer(TN)

11-07-1999 20:46:46




Report to Moderator
 Re: Hotrodding a 45 block, in reply to Big Dog , 10-31-1999 13:16:34  
Get ahold of Don Ivey at the Tractor Barn in Paris TN. Phone 901-642-4401. He builds and runs pulling tractors, unstyled WC's with 38" rears. He has been very helpful with information with me. One of the things he does is put 454 Chev valves in them for better breathing.



[Log in to Reply]  [No Email]
Tony H.

11-01-1999 20:02:28




Report to Moderator
 Re: Hotrodding a 45 block, in reply to Big Dog , 10-31-1999 13:16:34  
I don't know the sizes of the cyls or stroke that have been put in one of these blocks but I have "heard" of almost 500ci out of one block. Tony



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy