Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

MODEL CA

Welcome Guest, Log in or Register
Author 
MARK S.

08-05-1998 09:54:44




Report to Moderator

I RECENTLY PICKED-UP A MODEL CA AND AM TRYING TO FIGURE OUT WHAT YEAR IT IS? I WAS TOLD IN THE 50'S. I AM ALSO INTERESTED IN IMPLEMENTS FOR IT. IT'S A VERY NICE TRACTOR THAT I WILL USE AND WOULD LIKE TO SHOW.




[Log in to Reply]   [No Email]
Mike Huber

08-05-1998 11:51:55




Report to Moderator
 Re: MODEL CA in reply to MARK S., 08-05-1998 09:54:44  

: I RECENTLY PICKED-UP A MODEL CA AND AM TRYING TO FIGURE OUT WHAT YEAR IT IS? I WAS TOLD IN THE 50'S. I AM ALSO INTERESTED IN IMPLEMENTS FOR IT. IT'S A VERY NICE TRACTOR THAT I WILL USE AND WOULD LIKE TO SHOW.

Mark I believe the Serial # is in front & to the left of the gear shifter If you can find it it should start with a CA I can tell you the year Mike Huber



[Log in to Reply]  [No Email]
MARK S.

08-06-1998 06:07:33




Report to Moderator
 Re: Re: MODEL CA in reply to Mike Huber, 08-05-1998 11:51:55  
MIKE, THE SER# IS CA16682 . I WOULD LIKE TO GET SOME MANUALS TO MAKE SURE I'M NOT MISSING ANYTHING. I'VE SEEN SOME ADVERTISED ON THIS HOMEPAGE BUT AT $30 BUCKS A POP. THANKS FOR THE INFO, MARK.



[Log in to Reply]  [No Email]
Ted Buisker

08-06-1998 06:52:49




Report to Moderator
 Re: Re: Re: MODEL CA in reply to MARK S., 08-06-1998 06:07:33  
: : : MIKE, THE SER# IS CA16682 . I WOULD LIKE TO GET SOME MANUALS TO MAKE SURE I'M NOT MISSING ANYTHING. I'VE SEEN SOME ADVERTISED ON THIS HOMEPAGE BUT AT $30 BUCKS A POP. THANKS FOR THE INFO, MARK.

Your CA is a 1952 model according to Norm Swinford's book. You should be able to get a manual from your local AGCO dealer for around $10, if he isn't one of those dealers who marks things up an additional 15% over suggested list like our dealer does. Good Luck. TED

[Log in to Reply]  [No Email]
Mike Huber

08-06-1998 10:14:28




Report to Moderator
 Re: Re: Re: Re: MODEL CA in reply to Ted Buisker, 08-06-1998 06:52:49  

: : : : : : MIKE, THE SER# IS CA16682 . I WOULD LIKE TO GET SOME MANUALS TO MAKE SURE I'M NOT MISSING ANYTHING. I'VE SEEN SOME ADVERTISED ON THIS HOMEPAGE BUT AT $30 BUCKS A POP. THANKS FOR THE INFO, MARK.

: Your CA is a 1952 model according to Norm Swinford's book. You should be able to get a manual from your local AGCO dealer for around $10, if he isn't one of those dealers who marks things up an additional 15% over suggested list like our dealer does. Good Luck. TED

Hello Mark Ted is right it is a 1952 do you get the old Allis News ? In there Spring 1998 issue there is a place for manuals for a CA Opertators for $5.95 and a service manual for $8.95 Plus $1.50 for shipping the address is King Books PO box 86,Rador Oh. 43066-0086 E-mail me for more info if you need it Mike Huber

[Log in to Reply]  [No Email]
MARK S.

08-07-1998 06:15:44




Report to Moderator
 Re: Re: Re: Re: Re: MODEL CA in reply to Mike Huber, 08-06-1998 10:14:28  

THANKS FOR TH INFO. THIS IS MY FIRST TRACTOR. I PLAN ON SUBSCRIBING TO A COUPLE TRACTOR MAGAZINES, I DIDN'T KNOW THERE WAS AN ALLIS NEWS.
ARE YOU ANY GOOD WITH ENGINE CODES? ON THE RIGHT SIDE OF THE BLOCK BY THE PLUGS IS STAMPED AM4033-9 AND BEHIND THE COIL IS A COUPLE HARD TO READ #S LIKE 8 # # ?
I LIVE NEAR CANTON OHIO AND PLAN ON ATTENDING THE LOCAL COUNTY FAIRS, THERE ARE USUALLY TONS OF NICE TRACTORS THAT ARE ON DISPLAY THERE.
THANKS AGAIN, MARK.

[Log in to Reply]  [No Email]
Ted Again

08-08-1998 07:37:23




Report to Moderator
 Re: Re: Re: Re: Re: Re: MODEL CA in reply to MARK S., 08-07-1998 06:15:44  

: : THANKS FOR TH INFO. THIS IS MY FIRST TRACTOR. I PLAN ON SUBSCRIBING TO A COUPLE TRACTOR MAGAZINES, I DIDN'T KNOW THERE WAS AN ALLIS NEWS.
: ARE YOU ANY GOOD WITH ENGINE CODES? ON THE RIGHT SIDE OF THE BLOCK BY THE PLUGS IS STAMPED AM4033-9 AND BEHIND THE COIL IS A COUPLE HARD TO READ #S LIKE 8 # # ?
: I LIVE NEAR CANTON OHIO AND PLAN ON ATTENDING THE LOCAL COUNTY FAIRS, THERE ARE USUALLY TONS OF NICE TRACTORS THAT ARE ON DISPLAY THERE.
: THANKS AGAIN, MARK.

Another good magazine for old tractor buffs is "Antique Power" 800-310-7047, And "The Allis Connection" club at 319-652-2949, annual dues are $20 with six informative newsletters a year.

[Log in to Reply]  [No Email]
keith

08-09-1998 15:42:41




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: MODEL CA in reply to Ted Again, 08-08-1998 07:37:23  
there is a show at the dover fair grounds on the 14th and 15th of this month. which side of canton do you live on. i live in new philly, and i have a ca too.

: : : : : THANKS FOR TH INFO. THIS IS MY FIRST TRACTOR. I PLAN ON SUBSCRIBING TO A COUPLE TRACTOR MAGAZINES, I DIDN'T KNOW THERE WAS AN ALLIS NEWS.
: : ARE YOU ANY GOOD WITH ENGINE CODES? ON THE RIGHT SIDE OF THE BLOCK BY THE PLUGS IS STAMPED AM4033-9 AND BEHIND THE COIL IS A COUPLE HARD TO READ #S LIKE 8 # # ?
: : I LIVE NEAR CANTON OHIO AND PLAN ON ATTENDING THE LOCAL COUNTY FAIRS, THERE ARE USUALLY TONS OF NICE TRACTORS THAT ARE ON DISPLAY THERE.
: : THANKS AGAIN, MARK.

: Another good magazine for old tractor buffs is "Antique Power" 800-310-7047, And "The Allis Connection" club at 319-652-2949, annual dues are $20 with six informative newsletters a year.

[Log in to Reply]  [No Email]
Mark S.

08-12-1998 08:50:19




Report to Moderator
 Re: Re: Re: Re: Re: Re: Re: Re: MODEL CA in reply to keith, 08-09-1998 15:42:41  

I live near the Timken Co. Faircrest Steel Plant exit 101 on 77. I was going to go to Dover but I have to work this weekend. I do plan on attending the Stark County fair. I'll take my CA and my wife will take our Appaloosa Colt.
Mark.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy