TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum

Allis C Question

Welcome Guest, Log in or Register

Author

Uh oh

02-26-2007 18:14:27

Report to Moderator

Can anyone tell me where to get a new governor bushing that goes where the governor goes through the block? do i have to go through the dealer or can the bushing be removed and reused without damage? Also, can i change the governor without getting chatter or problems between non matched gears? thanks!!

[Log in to Reply] [No Email]

old

02-26-2007 19:30:58

Report to Moderator

Re: Allis C Question in reply to Uh oh, 02-26-2007 18:14:27

Thompkins in Eldon will have that part Nate, shoot if you have a credit card they will even ship it to you, guess how I know that?? Yep done it more then once. I also have a gov. sitting here. Did you get my message I left on your phone the other day about putting the sleeves in??

Hobby farm

[Log in to Reply] [No Email]

Uh oh

02-26-2007 22:20:49

Report to Moderator

Re: Allis C Question in reply to old, 02-26-2007 19:30:58

Hey Old, thanks for the reply.... i got your message and greatly appreciate it... been runnin like mad, so i hadnt gotten back with you yet, but believe me, i greatly appreciate your help. i have another governor on my shelf, but didnt know if they gear on it would be ok with the cam and crank gears that are there, or if it would chatter or eat the gear up? thanks again!

[Log in to Reply] [No Email]

old

02-27-2007 08:27:59

Report to Moderator

Re: Allis C Question in reply to Uh oh, 02-26-2007 22:20:49

The other gov. should work just fine. Ya there might be a little miss match but that will work its self out in just a couple hours of runnung. I'm always happy to help when and if I can, but I think you done figured that out already LOL

Hobby farm

[Log in to Reply] [No Email]

Uh oh

02-26-2007 22:20:43

Report to Moderator

Re: Allis C Question in reply to old, 02-26-2007 19:30:58

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy