Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Trade 8N for WD45?

Welcome Guest, Log in or Register
Author 
Jon from WI

01-19-2007 21:17:35




Report to Moderator

I am new to this board and the AC so please excuse my asking some basic AC questions. I found a "restored" WD-45 for sale in my area (new paint,tires,etc) that I plan on looking at tomorrow. Can the impliments (blade,bush hog,dirt scoop,etc from the 8N) be used on the WD45 or is the 3 pt set up different? Also does the WD45 have live power? And finally, is a narrow front a safety concern (my 8N has a WF) and can it be converted to a WF? Also, I need a bucket and was wondering if this is an expensive addition to install. Lastly, if anyone can give me some guidance on ID"ing the tractors age, etc that would be greatly appreciated. The owner is asking $2,500 for the tractor with a blade. That seems a little high to me. Any comments?

[Log in to Reply]   [No Email]
BDT in Minnesota

01-22-2007 10:05:05




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
Tim, sounds like the choice I came up with back in 1978...Shame on me for selling the completely rebuilt 8N after buying the WD45..I wanted a bigger tractor with Live pto and more traction...Well, I defenitely got that, but prior to owning the WD45, the 8N was doing my work just fine..My WD45 came with a Allis trip bucket loader,,which I call "My Norwegian Payloader attachment" That thing comes in handy at times, but spends about 360 days a year hanging from the rafters in the pole shed..When I need it, It takes about 90 seconds to slip on, including cylinders..That tractor seems so clunky it tight spots with the loader on..OH, and as far as loader work, the reverse gear is way too slow to ever call it a true "loader tractor"..The WD45 was born and bred for PTO, row crops and plowing..The 8N better suited for utility work...I have worked for both an Allis Chalmers and a Ford dealer, And both tractors are held in high reguards...Oh and I am 3/8 Norwegian also..Wish I still had both tractors...b
Bruce D "Doc" Trandem,,Erskine ,MN

[Log in to Reply]  [No Email]
tim[in]

01-21-2007 15:23:34




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
a ford 8n while it has a wide front is stil prone to a backwards rollover. they are extremely light in the front end.i was bushogging with a neighbors jubilee and was surprised at first by how light the front end was. i had run ours for years as it was in a garage needed overhauled. i havea wd, wd45 and a d17. the 17 is the only wide front. i've added weight to it to give me more stability in lifting heavy loads on the rear. i've got a loader on the wd. i made it a practice to be carefull from the start so never had any trouble on steep hillsides. nephew however showing off for friends turned it over. my ac s feel heavier in the front than the 8n does. the ac's have live power when you use the hand clutch and not the foot clutch. that is too high unless it has been overhauled properly and tires and paint are above average.it is cheaper to put power steering on an ac45 than the 8n . the loader while mostly trip bucket[which can be canverted with some effort' can be found resonable. i paid $190.00 for mine a wd9 trip loader.

[Log in to Reply]  [No Email]
Texas Denny

01-20-2007 20:57:49




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
The two characteristics that affect the tendency to roll over is "center of gravity" and "wheel spacing". The center of gravity on a WD-45 is quite a bit higher than it is on a Ford 8N which makes the WD-45 more prone to roll over. With any tractor, the wider the wheel spacing, the more stable the tractor is. Though there are many that argue that a wide front makes a substantial difference, on most tractors the wide front helps but it is not nearly as important as wheel spacing. My experience is that more people are involved in roll overs with wide front tractors than narrow front. Could be because the drivers have a false sense of security with the wide front. If you are in hilly terraine, go straight down the steepest grades and straight up on less steep grades. Use wide wheel spacing. If you are not in hilly terrain, it makes no difference what the "center of gravity" is, what the wheel spacing is or if you have a wide front.

The loader presents a tip over problem. Always transport with the loader bucket as close to the ground as possible. A narrow front is a plus with a loader because both wheels are behind the bucket - works much better for grading or digging.

[Log in to Reply]  [No Email]
Texas Denny

01-20-2007 20:54:20




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
The two characteristics that affect the tendency to roll over is "center of gravity" and "wheel spacing". The center of gravity on a WD-45 is quite a bit higher than it is on a Ford 8N which makes the WD-45 more prone to roll over. With any tractor, the wider the wheel spacing, the more stable the tractor is. Though there are many that argue that a wide front makes a substantial difference, on most tractors the wide front helps but it is not nearly as important as wheel spacing. My experience is that more people are involved in roll overs with wide front tractors than narrow front. Could be because the drivers have a false sense of security with the wide front. If you are in hilly terraine, go straight down the steepest grades and straight up on less steep grades. Use wide wheel spacing. If you are not in hilly terrain, it makes no difference.

[Log in to Reply]  [No Email]
BCnT

01-20-2007 16:00:26




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
if you've got alot of trees you shred under i'd keep the Ford...the WD is much taller and not too good gettin into tite spots IHMO



[Log in to Reply]  [No Email]
Bill(Wis)

01-20-2007 05:28:25




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
Be careful, be prepared. Get the WD serial # lists off the R&I at the left. Some people call their plain old WD a "WD-45" just to make a few extra bucks and some just plain don't know the difference. WD-45 has a good bit more power. Tractor serial # is on the rear vertical face of the axle housing right below the left brake access panel (cover). The official WD-45 run started at serial # WD146607. The serial # are usually hard to see and some buffing will probably be needed to make it out. It is there. Allis Chalmers made improvements to their tractors as things went along and didn't wait to incorporate those changes in the next model year. Power steering became a standard feature in 1956. All WD-45's with gas engines had a Delco-Remy distributor ignition system. (No magneto). The engine had no right side inspection/access panel as found on the WD. A traction booster indicator was included on the WD-45 found near the engine oil pressure gauge. All this is from memory, what did I miss? Anyone? Oh, yes. You're question about three point. Brief answer is no, UNLESS someone has added an aftermarket three point hitch, which is esay to do but costs ???$$$.

[Log in to Reply]  [No Email]
John (MO)

01-21-2007 06:35:39




Report to Moderator
 Re: Trade 8N for WD45? in reply to Bill(Wis), 01-20-2007 05:28:25  
Sorry but power stearing was never a standard feature on WD45`s. A few had optional factory power stearing and some had after market added but most don`t have it. Even with a loader people have gotten along ok with out it for all these years. An after market 3 point hitch can be added, it`s a simple bolt on to the drawbar and snap into the lift latches addition. Many many straight WD tractors had WD45 cranks and pistons added at previous overhauls, so without tearing the engine down, there is not telling what is inside. The WD engine had a large bolt on plate on the side, the 45 engine did not have this plate and was solid. Engine block swaps are common after all this time, but a WD block very well have the 45 guts. A straight WD usually isn`t worth quite as much as a WD45, but the later WD`s had the same transmission as WD45`s (curved shifter) and if the engine was built up with 45 parts at an overhaul, there just isn't much difference at all. DO NOT go by what the decals on the tractor say it is.

[Log in to Reply]  [No Email]
Ken L.

01-20-2007 04:58:46




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
I will try to answer your questions. The WD-45 did not come with the three point hitch but it may have been converted or, if not, you can convert it with a kit. Live PTO, Ii has a foot clutch and a hand clutch. You have to use the foot clutch to change gears. This will also stop the PTO. If you release the hand clutch, it will stop forward or reverse motion of the tractor but, it will not release the PTO so, yes it has live PTO but, not independent PTO. Wide front, you can get an original style from a salvage yard or you can get aftermarket ones also. Loader, yes, you can put a loader on it. Age, Find the serial number, come back to this sight, look under research and info, look under serial numbers and you will find the year of your tractor. $2500, If it's in nice condition along with the new tires and paint, I'd say that the price is OK. Hope this helps.

[Log in to Reply]  [No Email]
BDM

01-19-2007 22:44:42




Report to Moderator
 Re: Trade 8N for WD45? in reply to Jon from WI, 01-19-2007 21:17:35  
If it's truly restored, I think that's a good price.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy