Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

WC with Leroy engine

Welcome Guest, Log in or Register
Author 
michigan allis

12-19-2006 16:59:00




Report to Moderator

Situation: I have a 38 WC with a Leroy engine, not sure if 201 or 226 cid, 4x4 vs. 4x41/2.

Questions; 1) are there any identifying marks to tell me the difference. 2) in either one will the allis rebuild kits with 4 1/8 bore pistons and sleeves interchange in these blocks.

according to the old nebraska books i have checked, "47 through "56 both blocks weigh 590#, both run at 1800 rpm and appear the same in data. curious if one can put a WD 45 crank into a leroy 201 block or will i run into the same problems that distinguish the allis 201 and 226 block and cranks. thanks and happy holidays.

[Log in to Reply]   [No Email]
cadet trooper

12-22-2006 17:06:27




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
I appreciate your understanding MA. We started an AC dealership in the late 70s just before the bottom dropped out in the grain market but the first year was a boom then a nose dive but we had a very nice older gentleman behind the parts counter that had been with AC forever and he would tell us one story after another about the history of AC, we would actually set at lunch time and listen to them like kids listening to a bedtime story never did we realize that we should have recorded them for posterity. Every Corporate rep that stopped in had 30 or 40 years with the company with great stories to tell. Now they're all gone, never once did we think to record those times. It's like they say when an old person dies its like a library burns down. Merry Christmas to you too.CT

[Log in to Reply]  [No Email]
cadet trooper

12-21-2006 17:35:20




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
Sorry Michigan Allis,for a saracastic comment but I asked a question a few months ago about the connection between Leroi and Allis-Chalmers engines and basically I was told I didn't know what the Hexx I was talking about and that AC made their own engines and there was no way that was possible which I knew was wrong because I knew the diesel was Buda. Sorry for the way I came across.CT



[Log in to Reply]  [No Email]
michigan allis

12-21-2006 18:52:14




Report to Moderator
 Re: WC with Leroy engine in reply to cadet trooper, 12-21-2006 17:35:20  
hope you have a merry christmas cadet, my frustration was not vented to you, i ran into the same when i asked the question of the local tractor group, so i know where you are coming from.



[Log in to Reply]  [No Email]
michigan allis

12-20-2006 19:40:47




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
cadet, if you check you will also find that heston and fox put leroi, continental and herules motors in their self propelled forage choppers back then also, i just want a simple answer to a simple question and thankyou for sharing your experience. none of us have all the answers thats why we have this forum, our family has had orange since '33,so the only ones that continue not to learn are the ones that have all the answers, or think they do.

[Log in to Reply]  [No Email]
AC

12-21-2006 04:20:42




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-20-2006 19:40:47  
Jeez man..relax. You will run into problems where the thrust bearing sits on the leroi block vs. the 45 crank.



[Log in to Reply]  [No Email]
cadet trooper

12-20-2006 17:55:49




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
I asked a similiar question on this forum about the Leroi and Waukesha connection with the WD and WD45 and I was smitten or basically shunned as asking a ridiculous question and was told AC never farmed out their engines and that they made their own gas engine. We had an old parts guy in our dealership from AC that said the WD and WD45 was the Leroi engine and proved it to us one day when an old gentleman stopped in needing parts for his Leroi air compressor engine of which we had all of the needed parts we thought it was neat that AC put their engine in Leroi compressors and he said actually it's the other way around and just grinned he said most people don't know that.

[Log in to Reply]  [No Email]
michigan allis II

12-20-2006 06:36:11




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
any chance you could check the stroke on the engine out back? If it is a 4 1/2 then we would not be taking a risk of using a wd-45 crank.



[Log in to Reply]  [No Email]
michigan allis

12-19-2006 19:18:06




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
Harry, ac put different engines in the wc model to start out with in "33,,,,first came the waukashaw untill allis made there own engines, at some point the Leroy was used also, casting looked the same for the most part and unless you know the obvious things that set the 201 cid engine apart, plate on the distributor side ect, they look almost identicle, allis made the 226 engine heavier for the wd45 to better hold the 41/2 stroke crank, leroy didnt, same cast weight for the 201 and 226, i want to know how you tell the difference in the two and if the 226 crank or one from a 45 will work in the 201. i know,,,clear as mud, hope it clarified my question for you.

[Log in to Reply]  [No Email]
Harry Case

12-20-2006 20:46:52




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 19:18:06  
Thanks for the info. Had no idea these were Leroy engines but I guess it don"t matter. Also we had a few neighbors that had their WDs overhauled and always said they were 45s when they were done. I don"t think there is a problem using a regular WC or WD block upgrading to a 45 crank as long as the rods and pistons are used.



[Log in to Reply]  [No Email]
Harry Case

12-19-2006 18:59:37




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
Hey Guys What thu Hexx are you talking about ?????



[Log in to Reply]  [No Email]
old

12-19-2006 17:25:56




Report to Moderator
 Re: WC with Leroy engine in reply to michigan allis, 12-19-2006 16:59:00  
Can't really help you on those question but, I do have most of a leroy engine out back that would still have some good parts in it



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy