Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

7080

Welcome Guest, Log in or Register
Author 
Dan Travis

11-27-2006 15:31:37




Report to Moderator

I was looking at a 1981 7080 Allis and was wondering what they are like, the good and bads. And what is the pto. I think it is only a 1000. It looked like a different size 1000. What can i do to covert it to a regular 1000 or 540 if possible. It is a sharpe looking tractor




[Log in to Reply]   [No Email]
Texas Denny

11-28-2006 12:20:52




Report to Moderator
 Re: 7080 in reply to Dan Travis, 11-27-2006 15:31:37  
Dan, this is a big, big tractor developing over 180 hp on the PTO. If all of your equipment is set up for 540 pto, this tractor will be a bit too big for the equipment. I don't know if an adaptor is available. You could fairly easily make one and run the tractor at about 50% of the rpm shown on the tach for the PTO. It would turn about 500 that way. At the lower rpm, the engine will develop a lot less horsepower - probably around 80 or 90. Even at that, few PTO devices need that much power. You might still break something on your devices at that horsepower because the engine won't give when you hit a tough spot.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy