|
The PTO HP is around 46. Should run a 6" wood chipper with no problem. Most mounted PTO chippers are 3-point. If the D-15 is Snap Coupler you'll need a good 3-point adapter that is stabilized against side sway. Most of the manuals (operator, service, parts) you see advertised through after market sources are reproductions by Jen-Sales. My experience is that these don't always cover the latest versions of the model (example: the D-12 parts book doesn't cover Series II and III) and the reproduction quality is not that great. You can generally buy a more complete manual from an Agco dealer for only a couple bucks more than Jen-Sales (and their re-sellers) charge. Another common manual are the IT shop manuals. These are a nice supplement to the AC service manual. They are not a replacement for operator or parts manuals. Most AC operators manuals give parts illustrations, but not part numbers (you need a parts manual for that). You can often find a deal on AC manuals being auctioned at ebay. These are generally the original AC's manual that somebody got with their equipment, so you need to sure it is the right Series for your machine and it may not have all the supplements for later production years. Go to ebay (www.ebay.com) and search the entire site (both titles and descriptions) for "allis" and you'll be suprised at what comes up. Sale prices vary from $4 to $30 for most manuals and the high bid is often submitted in the last few seconds of the auction.
| 
