Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

rod bearing torque

Welcome Guest, Log in or Register
Author 
lgehring

07-23-2006 18:18:12




Report to Moderator

can anyone tell me the torque for the head bolts, and rod , main bearings on the model c engine ? i don't have a shop manual .
thanks
l gehring




[Log in to Reply]   [No Email]
gary case

07-25-2006 15:10:43




Report to Moderator
 Re: rod bearing torque in reply to lgehring, 07-23-2006 18:18:12  
out in the field we just torqed them enough so you could turn it with the crank. but i think Hogslapper might be a little closer to the books.



[Log in to Reply]  [No Email]
Hogslapper

07-23-2006 18:59:58




Report to Moderator
 Re: rod bearing torque in reply to lgehring, 07-23-2006 18:18:12  
Head bolts 60 ftlb from the center outward
Connecting rod bolts 40 ftlbs
Mains 80 ftlbs



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy