Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Allis Chalmers C

Welcome Guest, Log in or Register
Author 
Larry Hardesty

07-12-2006 15:31:05




Report to Moderator

I am in the process of getting an Allis Chalmers C from a relative who inherited it. At one time it ran well and then sat for several years. Stuck and someone stole the magneto off it. It is a project. I am more a Farmall person (sorry folks) and do not have the books (yet) for parts, etc. I am beginning to look for a new magneto. Any guidance as where I should look for serial number and how to determine year; and what I should be looking for regarding a magneto. I see several for sale from time to time on eBay or are there more reliable suppliers out there who would sell me one at a reasonable price and guaranteed to work. Obviously a newby question for Allis's are new territory for me. Neat little tractor and hate to see it rust away. I have Farmall A's and Super C's and other Farmall's. The Allis Chalmers C looks like a neat little tractor to work on and bring back! Thanks in Advance.

[Log in to Reply]   [No Email]
JMS/MN

07-12-2006 18:00:50




Report to Moderator
 Re: Allis Chalmers C in reply to Larry Hardesty, 07-12-2006 15:31:05  
Along with dealing with folks on this board or ebay, it is very easy to develop a network for parts and advice. Go to any tractor show and talk to exhibitors of your brand. Subscribe to a newsletter - ie, with AC, get Old Allis News, or join Upper Midwest AC Club- $15 per year, newsletters, ads, etc. May be other similar orgs where you live. Bound to be collectors of any make in any area, and if you like dealing face to face, the shows and contacts you make there are excellent for that. Called someone yesterday that I haven't talked to in 15 years- turned out he has a C Allis for sale, looking for a swather and maybe wagons, baler I have for sale, also looking for Moline fenders. Gave him 5 Moline contacts off the top of my head, two I just met Sunday while selling our club raffle tickets. Collectors just love to share.

[Log in to Reply]  [No Email]
Larry Hardesty

07-12-2006 19:50:56




Report to Moderator
 Re: Allis Chalmers C in reply to JMS/MN, 07-12-2006 18:00:50  
JMS/MN, Thanks. I have mostly Farmalls, one John Deere, and one Case. Got the usual books and magazines for them and made connections with suppliers. However, just have not had an Allis before, so getting started. Larry



[Log in to Reply]  [No Email]
Larry Hardesty

07-12-2006 19:52:52




Report to Moderator
 Re: Allis Chalmers C in reply to RandyN, 07-12-2006 16:41:54  
Randy, Thanks much. Tractor is about 45 miles away. Probably a few weeks before I get it hauled home. In the process of getting a building built for a shop and storage are for the tractors. Allis's are new to me and starting to plan when I do get it. Very helpful.

Larry



[Log in to Reply]  [No Email]
old

07-12-2006 16:33:24




Report to Moderator
 Re: Allis Chalmers C in reply to Larry Hardesty, 07-12-2006 15:31:05  
Let me know if you need parts I have 2 that are parts tractors and one that runs good. I took the 3 and made one good one. I have a mag but it needs a coil put in it before it would work. I also have one that someone turned in to a distubutor but it would need the coil and points, I want core price for either one of them. I also have a lot of other stuff. As far as it being locked up I would fill the cylinders with tranny fluid and let it sit for a few days. Then set a battery on it and pull the plug back out and do short fast hits on the starter and it might just pop loose.

[Log in to Reply]  [No Email]
Larry Hardesty

07-12-2006 19:48:24




Report to Moderator
 Re: Allis Chalmers C in reply to old, 07-12-2006 16:33:24  
Old, Thanks, I will keep your offer in mind. I looked at your website...nice!! Probably be a few weeks before I get the tractor and look at carefully. I am getting a building built so I have shop and storage area. Just retired and thought this C would be a good practice tractor. Had Farmall's as a kid, but we had a neighbor with a Allis Chalmers B. Pretty good tractor. Parts seemed cheaper that IH parts, and Dad thought it might out pull the our Super C, although the B was smaller.

[Log in to Reply]  [No Email]
old

07-12-2006 19:59:17




Report to Moderator
 Re: Allis Chalmers C in reply to Larry Hardesty, 07-12-2006 19:48:24  
Both are the same or close to the same HP so it would depend on tires and weights as to which one will out pull the other. I think the farmall will have a lower set of gears so it will probably out pull the allis. The C I have is called major pain because I keep haveing to work on this that or the other thing. I think it just likes to be wrenched on all the time LOL

[Log in to Reply]  [No Email]
Larry Hardesty

07-12-2006 20:07:08




Report to Moderator
 Re: Allis Chalmers C in reply to old, 07-12-2006 19:59:17  
Old, Been a long time ago, but I suspect my dad was impressed in that the Allis C looked about the size of our 1941 Farmall A, but had the muscle more like our 1952 Farmall Super C. It was our neighbor's only tractor and he did all his farming with it..back in the 50's. Most other neighbors who were small dryland farmers had a Ford 8N. There were a couple of AC WD in the area.



[Log in to Reply]  [No Email]
old

07-12-2006 20:18:18




Report to Moderator
 Re: Allis Chalmers C in reply to Larry Hardesty, 07-12-2006 20:07:08  
Know how that goes. I had a Farmall 450 rated at 55HP and I was very unhappy with its power. Then I got that Oliver Super 88 that is pictured in the web site, also rated at 55HP and it just plan pulls circles around that 450 I had. I used the 450 on my NH850 round baler and could only get a 4 foot bale out of it and I now use the S88 on it and it doesn't know when to stop and would brake the baler if I let it go to far and it never even slows down. I know the B or C would probably pull circles around any of the ford Ns

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy