Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

allis chalmers rc

Welcome Guest, Log in or Register
Author 
ed 3245

07-05-2006 17:22:44




Report to Moderator

We have an allis rc with a serial number of 3347 it runs and is complete whats it worth? Thanks




[Log in to Reply]   [No Email]
JMS/MN

07-06-2006 16:52:05




Report to Moderator
 Re: allis chalmers rc in reply to ed 3245, 07-05-2006 17:22:44  
I bought a 1939 (RC379?) last fall at a farm auction- was advertised as a WC, so only a few recognized what it really was. Several collectors there, but after about $500, only two of us. Paid 1100 for it. Good sheetmetal, had a saw rig on the front, wrong rear rims- one flat spoke, one round spoke. Tires fair to poor. Tractor shows very little wear. Transmission has Xnumber stamped on it- don't know what is different about it yet. Magneto coil was bad- just got parts and will get it running.

[Log in to Reply]  [No Email]
Ken L.

07-06-2006 16:36:34




Report to Moderator
 Re: allis chalmers rc in reply to ed 3245, 07-05-2006 17:22:44  
I bought an RC this spring. Front tires are new, rear tires are 80%, not one dent in the sheet metal or grill, lights are all there not one lens is cracked, got it running and it runs excellent.
About all I did to it was rebuild the carb and put new packing in the PTO. I will have to rewire it and install a new battery box. I will be repainting it also, it has the original paint. I paid $1200.00

[Log in to Reply]  [No Email]
John (C-IL)

07-06-2006 10:48:24




Report to Moderator
 Re: allis chalmers rc in reply to ed 3245, 07-05-2006 17:22:44  
Anywhere from $500 to $2500 based on your description and the buyer's interpretation of your description.

How is the sheet metal? What is the condition of the tires? Are the parts that are peculiar to the tractor still there? ie wheels, front plate, original engine etc.

A picture is worth a thousand words, but the price range on an RC is wide open.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy