Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Mag

Welcome Guest, Log in or Register
Author 
john morris

06-19-2006 23:43:39




Report to Moderator

I just removed the mag off my B and accidentely turned over the engine when I spunn the pully, will this have effected the ignition timing, and if so what should I do to rectify it.




[Log in to Reply]   [No Email]
old

06-20-2006 07:23:31




Report to Moderator
 Re: Mag in reply to john morris, 06-19-2006 23:43:39  
By the way its no big deal on mags they go on only 2 ways. 1 is the right way and the other is 180 and thats easy to fix also by either removeing the mag again and turning it 180 or by switching the plug wires 180 out, either one works BTDT to many time



[Log in to Reply]  [No Email]
john morris

06-20-2006 08:23:22




Report to Moderator
 Re: Mag in reply to old, 06-20-2006 07:23:31  
Thanks old, thats put my mind at ease, you guys are a great help, by the way if ever you visit Wales UK give me a shout, I would love to meat you all, may be we could organise an Allis convention !!!!! !!!!!



[Log in to Reply]  [No Email]
old

06-20-2006 09:25:15




Report to Moderator
 Re: Mag in reply to john morris, 06-20-2006 08:23:22  
Don't think I'll ever get over that way again. I was over there years ago, had a stop over at a sub base over there in the late 70s, the towns name started with an F but thats all I remember about it any more other then drinking beer on board the sub.



[Log in to Reply]  [No Email]
Rod (NH)

06-20-2006 04:11:33




Report to Moderator
 Re: Mag in reply to john morris, 06-19-2006 23:43:39  
Hi John,

Yes, that will affect the timing. See here for how to fix it. If you haven't disassembled the mag and it worked before, you can ignore reference to mag internal timing.

third party image Rod

[Log in to Reply]  [No Email]
john morris

06-20-2006 04:47:37




Report to Moderator
 Re: Mag in reply to Rod (NH), 06-20-2006 04:11:33  
Thanks for that, I am very greatfull for your help



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy