Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

Got me a problem help Please. Part 2

Welcome Guest, Log in or Register
Author 
old

03-24-2006 13:38:47




Report to Moderator

Well I got the sleeve out, I used my front end loader to press it out part of the way then took a 16lbs sledge hammr and knocked it out the rest of the way. Thanks guys for the ideas.
Now I have to wait on parts, guess you could say I'm lazy because I didn't take the time to make a sleeve puller. LOL




[Log in to Reply]   [No Email]
JMS/MN

03-25-2006 17:20:08




Report to Moderator
 Re: Got me a problem help Please. Part 2 in reply to old, 03-24-2006 13:38:47  
I remember Dad and brother using jack and blocks under the WC, then hitting the front of the tractor frame with the 16 pound mall. Gets them out!



[Log in to Reply]  [No Email]
chalmersbob

03-24-2006 18:41:05




Report to Moderator
 Re: Got me a problem help Please. Part 2 in reply to old, 03-24-2006 13:38:47  
OLD
important thing is it is out.
tried hammer once, didn't work. had to rig a hydaulic jack to pull it. bent the jack handle, but got it out.
BOB



[Log in to Reply]  [No Email]
old

03-24-2006 18:55:35




Report to Moderator
 Re: Got me a problem help Please. Part 2 in reply to chalmersbob, 03-24-2006 18:41:05  
Whats funny I figured the Ford 841 with big loader would have pushed it right out and that was with the front wheels a foot off the ground but it didn't do more then push it about an 1/8 inch out then the hammer did it in one lick. Guess the loader primed it and the hameer finished it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy