Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum
:

WD 45 Comfort Model

Welcome Guest, Log in or Register
Author 
JRT

03-15-2006 21:07:44




Report to Moderator

I now have a one of a kind WD 45 which is actually driveable without putting a man in traction for at least a couple of days. I added two extra universal joints to the steering wheel shaft, which allowed me to center the steering wheel. I took about 10 inches off the hand clutch lever to where it can no longer spring back and cripple my knee every time it is disengaged and I centered the seat to match the new position of the steering wheel. I also added a small instriment panel where all the controls are within easy reach including the pto control. I also got rid of that little wire like brake lock which never worked and added a stout lever which flips the locking device into position every time. I also lowered that big long clutch pedal down to match the brake pedals, and just for fun, I added a floor board type foot rest on each side. This tractor now drives and handles beautifully and is very comfortable to operate. If the Allis Company had gone just a little further and made this tractor more comfortable and easier to operate, in my opinion, they may have sold twice as many of the brutal old beasts. It was probably the most powerful for its size and the toughest tractor made in its day, yet it had to be the most uncomfortable of all the makes offered at the time. What were they thinking? For all you die hard WD 45 fans who may be shreeking because I questioned and modified the integrity of a very popular and proven old machine, don't worry. I carefully removed the original parts and laid them away for safe keeping without damage. After all, someday someone may want to put the tractor back in its original condition. However, if they drive it much in its new condition, they would probably never want to.

[Log in to Reply]   [No Email]
David W. Hammer

03-17-2006 21:18:24




Report to Moderator
 Re: WD 45 Comfort Model in reply to JRT, 03-15-2006 21:07:44  
After market M&W brake lock?



[Log in to Reply]  [No Email]
Leroy

03-17-2006 05:21:11




Report to Moderator
 Re: WD 45 Comfort Model in reply to JRT, 03-15-2006 21:07:44  
That seating position is why I have never considered an Allis to even buy. Farmall & John Deere, even Moline I could stand up on and drive and that is the way I did most of the time, not being able to do that and having to be streched all the time outweighed any thing else they would have going for them. Glad you found a way to make it useable.



[Log in to Reply]  [No Email]
Texas Denny

03-16-2006 07:06:06




Report to Moderator
 Re: WD 45 Comfort Model in reply to JRT, 03-15-2006 21:07:44  
You could put a couple of photos in "Tractor Photos".



[Log in to Reply]  [No Email]
John (MO)

03-16-2006 06:35:42




Report to Moderator
 Re: WD 45 Comfort Model in reply to JRT, 03-15-2006 21:07:44  
Hey I`d like to see pictures also. I never had a problem with people doing their own "improvements", my father was always making his own "improvements" on stuff. I`ll have to admit that some of his didn`t all turn out great. I think AC tractors were pretty good for there time, of course there were improvements each time the models were changed and now we can look back and take some of those ideas back to earlier models. I`d hate to see a 1953 Corvette cut up and customized, because there are so few of them, but such is not the case with most Allis models. I drove a CA that had been changed to set and drive more like the D series tractors one time and it wasn`t too bad.

[Log in to Reply]  [No Email]
ohio

03-16-2006 00:37:43




Report to Moderator
 Re: WD 45 Comfort Model in reply to JRT, 03-15-2006 21:07:44  
i'd like to see some pic's! (although i'm 6' tall and "big boned", i've never had trouble with wc's or wd's!) have a b though, and thought i'd help it out with an after-market suspended pan seat. it sucks! it will come of when tractor comes apart to remedy trans. problem!
actually, my fathers farmall b is the most uncomfortable tractor i've been on, and most comfortable were oliver, white units, and 185 allis, but i'm still more used to the controls on wd & wd45!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy