TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Allis Chalmers Discussion Forum

G sickle mower photo needed

Welcome Guest, Log in or Register

Author

Dave NE IA

01-20-2006 15:04:40

Report to Moderator

Does anyone have a picture of a G with a sickle bar mower?

I have parts manual, and not a operators manual.

I do need the correct belt number if anyone knows it, otherwise that is one I can find on my own by trial and error and error.

Before anyone jumps on my back I will get a operators manual, but you know if you get a new toy, a old boy can't wait like he should.

Also did they give the mower, cultivator, plow etc. model numbers? My experience with a search seems to be a pain in the rear. Perhaps I do not enter the correct search words. Thanks in advance. Dave NE IA

[Log in to Reply] [No Email]

ShepFL

01-23-2006 08:30:47

Report to Moderator

EBAY LINK WITH PICS in reply to Dave NE IA, 01-20-2006 15:04:40

No msg. Hope this helps.

G with Belly Sickle Bar Mower

[Log in to Reply] [No Email]

JERRYS ORIGINAL OWNER AC

01-21-2006 12:13:00

Report to Moderator

Re: G sickle mower photo needed in reply to Dave NE IA, 01-20-2006 15:04:40

The sickle mower for G is #4 power mower & I may be able to scan some pictures from the owner/operator manual at a latter date &try to get them to you

[Log in to Reply] [No Email]

Dave NE IA

01-22-2006 09:47:23

Report to Moderator

Re: G sickle mower photo needed in reply to JERRYS ORIGINAL OWNER AC, 01-21-2006 12:13:00

Thanks Jerry, This form usualy has the answers, I have not taken the time to check out the mower that a good ol boy gave me, but seems to need nothing, even the belt if it is correct is new in the pack. Warm weather will get me going, although NE IA has had global warming this winter, and we kind of like it. Some farmers or actualy only a few have done some field work. Never heard of in my life time.

Do you have a G? A friend of mine is Joe Ertl and owns Scale Models in Dyersville Ia. So if you see a G made by Scale Models they used our G for patterns. Makes it kind of special for our kids. Thanks again Dave NE IA

[Log in to Reply] [No Email]

Jerry L. Hendrix

01-23-2006 17:58:29

Report to Moderator

Re: G sickle mower photo needed in reply to Dave NE IA, 01-22-2006 09:47:23

Hi Dave I have the AC/G my dad bought new in 1950 with a plow, Field cultivator,& sickle mower.It has always been in the family and has served as the primary bread winner for a while (my dad used it raising tobacco,share cropping,custom work in the community & with a small trailer, served as the means of transportation for a family of 8 for a while.It has been in my posession for about 45 years & I am in the process of restoring it with about 75% completed.I have a lifetime of stories I could tell about growing up with the little AC/G.I have 2 of the Scale Models By Joe Ertel.I would send you some copies of pictures of the #4 sickle mower from my manual if I knew where to send them.

[Log in to Reply] [No Email]

Dave NE IA

01-24-2006 09:47:07

Report to Moderator

Re: G sickle mower photo needed in reply to Jerry L. Hendrix, 01-23-2006 17:58:29

Jerry, Memories being good, sometimes brings us back to a place of realizing how good we have it and what sacrafices our older generation have given to us. My children could use a good dose of reality if we could only make certian it was a real dose and short term. Perhaps my parents tried to tell me the same.

The Scale Models we have we tried to make certian Joe signed them, and he would be more than happy to do so for you if you can get them to him. He is a real swell guy, far above me in his income level yet is as common as they get. Joe made many models for the Ertl Co. like the IH 560 etc. and has a real talent.

My address is Dave Bacon PO box 84 204 West Watson St. Garnavillo, Iowa 52049 I will certianly make it right with you.

Thanks for your kindness Dave NE IA

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy